Hood Insulation & Clips
-
These seals attach to the inner fenders and cover the upper A-frames protecting the engine compartment from various road debris such as water, salt, etc, keep your cars engine bay cleaner and prevent rust and chips in your car's engine bay.
-
This is a full kit for use on the first generation Fbody
1967 1968 1969 Camaro and Firebird
These triple plated chrome fender to radiator support fender bar braces and installation hardware are a great way to dress out your engine bay in minutes! Set includes chrome plated hardware kit for a clean matching install at home!
Polished triple chrome plated after-market style for dress up or show.
Sold as pair.
Includes 4 matching chrome mounting bolts.As always FREE SHIPPING inside the USA -
Complete Camaro 302 Cowl Induction System. Includes all our individually available superior quality parts: Faithfull reproduction air cleaner body with four barrel carb base (Rochester/Holley), attached breather tube (1" hose), stainless spark arrestor, high pleat count performance air filter, original gauge gloss black lid, 302 extension ring, cowl seal flange, flange to hood seal, flapper valve seal, flapper valve, valve retainers, flapper frame and seal, OE quality licensed solenoid (with part number) and firewall relay, concourse quality FACTORY-FIT(c) wiring harness, hood grommet, cowl induction throttle arm with hardware, switch and retainer, correct small block valve cover elbow and grommet. All hardware and installation instructions included. Original high gloss coated black finish.
As always FREE SHIPPING inside the USA
-
Complete Camaro 396 Cowl Induction System. Includes all our individually available superior quality parts: Faithfull reproduction air cleaner body with four barrel carb base (Rochester/Holley), attached breather tube (1" hose), stainless spark arrestor, high pleat count performance air filter, original gauge gloss black lid, 396 extension ring, cowl seal flange, flange to hood seal, flapper valve seal, flapper valve, valve retainers, flapper frame and seal, OE quality licensed solenoid (with part number) and firewall relay, concourse quality FACTORY-FIT(c) wiring harness, hood grommet, cowl induction throttle arm with hardware, switch and retainer, correct big block valve cover elbow and grommet. All hardware and installation instructions included. Original high gloss coated black finish.
As always FREE SHIPPING inside the USA
-
Rubber grommet with stamped spring steel insert keeps cowl induction wiring harness from chafing against hood.
For use on 1969 Camaro models with cowl induction system.
As always FREE SHIPPING inside the USA
-
Accurate stamped steel frame. Includes correct solenoid screw and welded blind nut. Black finish.
Fits 1969 Camaro
As always FREE SHIPPING inside the USA
-
Injection molded high strength ABS. Accurate reproduction of original cowl induction flapper valve.
For use on 1969 Camaro with cowl induction system.
As always FREE SHIPPING inside the USA
-
1969 Camaro with cowl induction.
Set of three injection molded ABS clips hold valve to frame.
As always FREE SHIPPING inside the USA
-
For use on 1969 Camaro models with cowl induction.OE quality cowl induction firewall relay. Brass contacts and phenolic style injection molded base, unlike others.
Officially Licensed GM Restoration Parts.
As always FREE SHIPPING inside the USA
-
For your 1969 Camaro this is an accurate high quality reproduction cowl induction solenoid reproduction includes imprinted part number on case as original.
Officially Licensed GM Restoration Parts.
GM Group #: 3.415 GM Part #: 1114427
As always FREE SHIPPIG inside the USA
-
For use on 1967 1968 1969 Camaro and Firebird
This is a replacement soft rubber hood to cowl seal for 1967-1967 Camaro and Firebird. This seal clips to the underside of the hood, and seals between the hood and cowl ledge.
Replace your missing or dry rotted seals today!
Units fit
1967 1968 1969
Camaro Firebird Trans Am
Shipping is available worldwide
Use the drop down menu below to select ship to location. -
For use on 1967 1968 1969 Camaro and Firebird
Seal measures 43 - 1/4 inch long.
This is a replacement soft rubber hood to cowl seal for 1967-1967 Camaro and Firebird. This seal clips to the underside of the hood, and seals between the hood and cowl ledge.
Replace your missing or dry rotted seals today!Produced by Metro Moulded and backed by a 15 year replacement warranty.
Units fit
1967 1968 1969
Camaro Firebird Trans Am
Shipping is available worldwide
Use the drop down menu below to select ship to location. -
For use on 1967 Camaro and Firebird With Convetible Top
Windshield Pillar Post Seals for Convertibles.No wire inserts. 22-1/4" long. Sold as a pair Left & Right
Produced by Metro Moulded and backed by a 15 year replacement warranty.
Units fit
1967
Camaro / Firebird Convertible Models
Shipping is available worldwide
Use the drop down menu below to select ship to location. -
For use on 1967 1968 1969 Camaro and Firebird With Convetible Top
This is a new replacement Header Weather Seal that includes the first roof rail sections.
1rst Roof Rail Seals are 20" long each while the center section 49" long.
Produced by Metro Moulded and backed by a 15 year replacement warranty.
Units fit
1967 1968 1969
Camaro / Firebird Convertible Models
As always shipping is FREE inside the USA -
For use on 1967 1968 1969 Camaro and Firebird with Convetible Top
This is a new replacement Header Weather Seal
This unit measures 39 & 3/8 inches long.
Why have wind noise and water leaks? Replacing your header weather seal is easy to do at home!
Produced by Metro Moulded and backed by a 15 year replacement warranty.
Units fit
1967 1968 1969
Camaro / Firebird Convertible Models
As always shipping is FREE inside the USA -
For use on 1967 Camaro and Firebird
This is a new replacement Door Hull Weather Stripping Set for both doors (Left & Right)
Replaces GM Part # 7638506 7638507
Why have wind noise and water leaks? Replacing your door hull weather seals is easy to do at home!
Produced by Metro Moulded and backed by a 15 year replacement warranty.
Units fit
1967
Camaro / Firebird -
For use on 1968 - 1969 Camaro and Firebird
This is a new replacement Door Hull Weather Stripping Set for both doors (Left & Right)
Replaces GM Part # 7719476 & 7719477
Why have wind noise and water leaks? Replacing your door hull weather seals is easy to do at home!
Produced by Metro Moulded and backed by a 15 year replacement warranty.
Units fit
1968 Camaro / Firebird
1969 Camaro / Firebird -
Complete Camaro 350 Cowl Induction System. Includes all our individually available superior quality parts: Faithfull reproduction air cleaner body with four barrel carb base (Rochester/Holley), attached breather tube (1" hose), stainless spark arrestor, high pleat count performance air filter, original gauge gloss black lid, 350 extension ring, cowl seal flange, flange to hood seal, flapper valve seal, flapper valve, valve retainers, flapper frame and seal, OE quality licensed solenoid (with part number) and firewall relay, concours quality FACTORY-FIT(c) wiring harness, hood grommet, cowl inductionn throttle arm with hardware, switch and retainer, correct small block valve cover elbow and grommet. All hardware and installation instructions included. Original high gloss coated black finish.
As always FREE SHIPPING inside the USA
-
Correct finish, accurate reproduction. unlike others clip is the correct diameter for proper and easy installation. For .60" diameter switches GM Group #: 3.885 GM Part #: 9788460
For 1969 Camaro models
As always FREE SHIPPING inside the USA.