Heating & Cooling Systems
The heating and cooling system is an important part of your first generation Camaro and Firebird. Not only for appearance but to keep the engine cool and the heater working properly. We have a wide variety of the replacement parts you need.
As always Shipping inside the USA is free on all of our products
-
1967 - 1981 Camaro Trans Am NEW Radiator Support Bushing Kit. This item is a must have for anyone rebuilding your car's front end. One of the fastest areas of wear out is these bushings.
This kit includes all the correct bushings, heat treated bolts, and washers to remount the radiator core support to the front frame rails and front clip.. -
-
Free
New replacement 1967 - 1969 Firebird Trans Am 400 NON AC Radiator Seal Kit.
-
-
-
Free
This unit secures the right hadn side of the fan shroud to the radiator on 67-69 Camaros.
-
-
This is a reproduction of the orignial fan shroud bracket.
-
-
Free
This is a replacement fan shroud bracket for 1967 - 1969 Camaro and Firebird.
-
-
-
Free
This is a new factory style replacement fan shroud for 1967- 1968 Camaro with factory big block engines with and also without A/C.
NOTE: Some after market radiators may or may not have proper fan shroud mounting brackets. Please check your current radiator prior to ordering to ensure your brackets are on the unit. We offer many mounting brackets and hardware also if needed!
SHIPPING AVAILABLE WORLDWIDE, USE DROP DOWN MENU TO SELECT SHIPPING LOCATION
-
-
-
Free
This is a new factory style replacement fan shourd for 1967-1968 Camaro with NON AC and small block V-8.
-
-
-
Free
This is a 67 - 69 Camaro fan shroud for use on Air Conditioned cars and small block
-
-
-
Free
This is a new replacement fan shroud for 1969 Camaro with small block V-8 and no A/C.
-
-
-
Free
This is a new replacement fan shroud for use on all 1969 Camaro with factoy Big Blocks.
-
-
-
Free
This is a new replacement fan shroud for use on 1967 - 1969 Firebird.
-
-
-
20% less
This is a PAIR of new replacement lower fan shroud connecting clips. These secure the lower fan shroud to the core support. units fit all 1967 - 1981 Camaro and Trans Am models with all engine combinations and with or without air conditioning.
-
-
-
Free
This is a PAIR (Left & Right of the brackets which hold the Air Conditioning Condenser to the radiator support.
-
-
-
Free
This is a 8 pc new replacement "tower factory style" replacement hose clamp kit.
-
-
-
Free
This is a pair of new replacement heater hse retainer brackets.
-
-
-
Free
This is a New 1967 - 1992 Camaro Trans Am Carburator Preheater Hose
-
-
-
Free
1967 - 1974 Camaro Trans Am Reproduction Radiator Cap NEW!SHIPPING AVAILABLE WORLDWIDE, USE DROP DOWN BOX TO SELECT SHIPPING LOCATION
-
-
-
Free
1967 - 2002 Aftermarket Radiator Cap With Lever NEW! -
-
-
Free
1967 - 2002 Camaro Trans Am Aftermarket Radiator Cap Without Lever NEW! -
-
-
Free
1967 - 1981 Camaro Trans Am Aftermarket Stainless Overflow Tank NEW! -
-
-
Free
This is a new replacement BLACK outer fan box cover for 1967 - 1981 Camaro and Trans Am.
For use on NON air conditioning cars. This is the HIGHEST quality reproduction available in the market today!
Proper stamping and thickness ensures a proper install and a great way to make your engine bay come alive once again!
FREE SHIPPING IN THE USA
Worldwide Shipping Also Available!
-
-
-
Free
This is a new replacement BLACK outer fan box cover for 1967 - 1969 Camaro Big Block Models with no factory air conditioning. (NON A/C)
FREE USA SHIPPING
Worldwide Shipping Also Available
-
-
-
Free
This is a new replacement BLACK outer NON AC Car heater and fan delete plate.
If you are not running a fan in your car instead or fabbing up some nightmare to cover the holes in the body tub in the engine bay compartment, simply install these delete plates. They mountinto the factory holes and offer a clean looking delete on your factory NON AC car!
FREE SHIPPING IN THE USA
Worldwide Shipping Also Available!
-
-
-
Free
This is a new replacement BLACK outer NON AC Car heater and fan delete plate. For use on 1967 1968 1969 Camaro with Air Conditioning.
Installing this closes the holes for the inner heater box and fan on the firewall. This is an accurate reproduction and is clean unlike many home made kits this is the way to make it look like a GM delete.
FREE USA SHIPPING
Worldwide Shipping Also Available
-
-
-
Free
This is a replacement fan shroud bracket for 1967 - 1969 Camaro and Firebird.
Includes hardware as shown.
FREE USA SHIPPING
Worldwide Shipping Also Available
-
-
-
Free
1967 - 1983 Firebird Trans Am Camaro Fan Speed resistor new replacement for NON air conditioned cars.
FREE USA SHIPPING
Worldwide Shipping Also Available
Use the drop down menu box for out of country shipment.
-
-
-
Free
This is a replacement fan shroud bracket for 1969 Camaro with big block engine..
FREE USA SHIPPING
Worldwide Shipping Also Available
Use the drop down menu box for out of country shipment.
-
-
-
Free
High grade cast aluminum includes cast GM part number as original for 69 and up applications. **Note Pre 69 applications had casting number in different location. Gasket included. Officially Licensed GM Restoration Parts.
FREE USA SHIPPING
Worldwide Shipping Also Available
-
-
-
Free
For use on 1967 1968 1969 Camaro Firebird with Big Block engines. Die stamped, heavy compression material heater tube and firewall block off seals set.
396 350 400 454 455
FREE USA SHIPPING
Worldwide Shipping Also Available
-
-
-
Free
For use on 1967 1968 1969 Camaro with Big Block engines. Show quality stamping. Sharp and crisp bends, original thickness. For NON AC cars where the heater core tubes enter. This is a cover plate.
FREE USA SHIPPING
Worldwide Shipping Also Available
-
-
-
Free
1967 - 1969 Firebird and Camaro COLD-CASE 23" Aluminum Radiator for Big Block Automatic Transmission
This is a 23 inch 1967 - 1969 Camaro and Firebird COLD-CASE radiator.These COLD-CASE radiators are Tig welded 100% aluminum and absolutely beautiful.
Don't buy a 3 or 4 row aluminum radiator! It doesn't cool as good as these oversize 2 row models.These radiators are original appearing and have the correct stamping. Once painted, you'd be hard pressed to find a difference over an original versus a COLD-CASE.
-100% TIG welded
-All Aluminum
-Polished OE style tanks
-(2) 1.25" Tubes
-16 fins per inch
-Corrugated fins that give more surface area and more thermal transfer
-Pressure tested
-For automatic transmission
-Direct fitment for 67-69 Camaro BB/Firebird/Trans AmCore Height 16.85" Core Width 23" Overall Height 18.5" Overall Width 27.5" Overall Thickness 3" Tubes (2) 1.25" Tubes Upper Hose 1.50" Lower Hose 1.77" SHIPPING AVAILABLE U.S. and Canada, USE DROP DOWN MENU TO SELECT SHIPPING LOCATION
-
-
-
Free
1967 - 1969 Firebird and Camaro COLD-CASE 23" Aluminum Radiator for Big Block Manual Transmission
This is a 23 inch 1967 - 1969 Camaro and Firebird COLD-CASE radiator.These COLD-CASE radiators are Tig welded 100% aluminum and absolutely beautiful.
Don't buy a 3 or 4 row aluminum radiator! It doesn't cool as good as these oversize 2 row models.These radiators are original appearing and have the correct stamping. Once painted, you'd be hard pressed to find a difference over an original versus a COLD-CASE.
-100% TIG welded
-All Aluminum
-Polished OE style tanks
-(2) 1.25" Tubes
-16 fins per inch
-Corrugated fins that give more surface area and more thermal transfer
-Pressure tested
-For automatic transmission
-Direct fitment for 67-69 Camaro BB/Firebird/Trans AmCore Height 16.85" Core Width 23" Overall Height 18.5" Overall Width 27.5" Overall Thickness 3" Tubes (2) 1.25" Tubes Upper Hose 1.50" Lower Hose 1.77" SHIPPING AVAILABLE U.S. and Canada, USE DROP DOWN MENU TO SELECT SHIPPING LOCATION
-
-
-
Free
1967 - 1969 Firebird and Camaro COLD-CASE 21.25" Aluminum Radiator for SMALL BLOCK Automatic Transmission
This is a 21.25 inch 1967 - 1969 Camaro and Firebird COLD-CASE radiator.These COLD-CASE radiators are Tig welded 100% aluminum and absolutely beautiful.
Don't buy a 3 or 4 row aluminum radiator! It doesn't cool as good as these oversize 2 row models.These radiators are original appearing and have the correct stamping. Once painted, you'd be hard pressed to find a difference over an original versus a COLD-CASE.
-100% TIG welded
-All Aluminum
-Polished OE style tanks
-(2) 1.25" Tubes
-16 fins per inch
-Corrugated fins that give more surface area and more thermal transfer
-Pressure tested
-For automatic transmission
-Direct fitment for 67-69 Camaro SB/Firebird/Trans AmRadiator Specs
Core Height 16.85" Core Width 21.25" Overall Height 18.5" Overall Width 28.8" brackets Overall Thickness 3" Tubes (2) 1.25" Tubes Upper Hose 1.57" Lower Hose 1.77" SHIPPING AVAILABLE U.S. and Canada, USE DROP DOWN MENU TO SELECT SHIPPING LOCATION
-
-
-
Free
1967 - 1969 Firebird and Camaro COLD-CASE 21.25" Aluminum Radiator for SMALL BLOCK Manual Transmission
This is a 21.25 inch 1967 - 1969 Camaro and Firebird COLD-CASE radiator.These COLD-CASE radiators are Tig welded 100% aluminum and absolutely beautiful.
Don't buy a 3 or 4 row aluminum radiator! It doesn't cool as good as these oversize 2 row models.These radiators are original appearing and have the correct stamping. Once painted, you'd be hard pressed to find a difference over an original versus a COLD-CASE.
-100% TIG welded
-All Aluminum
-Polished OE style tanks
-(2) 1.25" Tubes
-16 fins per inch
-Corrugated fins that give more surface area and more thermal transfer
-Pressure tested
-For automatic transmission
-Direct fitment for 67-69 Camaro SB/Firebird/Trans AmRadiator Specs
Core Height 16.85" Core Width 21.25" Overall Height 18.5" Overall Width 28.8" brackets Overall Thickness 3" Tubes (2) 1.25" Tubes Upper Hose 1.57" Lower Hose 1.77" SHIPPING AVAILABLE U.S. and Canada, USE DROP DOWN MENU TO SELECT SHIPPING LOCATION
-
-
-
Free
1967 - 1969 Firebird and Camaro COLD-CASE 23" Aluminum Radiator for LS Swap Conversion Cars
This is a 23 inch 1967 - 1969 Camaro and Firebird COLD-CASE radiator.These COLD-CASE radiators are Tig welded 100% aluminum and absolutely beautiful.
Don't buy a 3 or 4 row aluminum radiator! It doesn't cool as good as these oversize 2 row models.These radiators are original appearing and have the correct stamping. Once painted, you'd be hard pressed to find a difference over an original versus a COLD-CASE.
-100% TIG welded
-All Aluminum
-Polished OE style tanks
-(2) 1.25" Tubes
-16 fins per inch
-Corrugated fins that give more surface area and more thermal transfer
-Pressure tested
-DUAL FLOW DESIGN
-Direct fitment for 67-69 F-Body cars with LS motorsRadiator Specs
Core Height 16.85" Core Width 23" Overall Height 19" Overall Width 30" Overall Thickness 3" Upper Hose 1.22" Lower Hose 1.37" Tubes (2) 1.25" Tubes SHIPPING AVAILABLE U.S. and Canada, USE DROP DOWN MENU TO SELECT SHIPPING LOCATION
-
-
-
Free
This is a 5 pc new replacement "tower factory style" replacement hose clamp kit.
-
