Moldings & Body Trim
Replacing the various exterior moldings and trim on your first generation Camaro and Firebird not only improves the look of your car but also greatly increases the value! The trim is what highlights the curves and the attention to detail makes all the difference! We hand pick the BEST reproduction parts so you end up with the best looking car! From window trim to rocker panel moldings and more we have it all!
As always Shipping inside the USA is free on all of our products
-
This is a 1967 - 1968 Firebird Fuel Door tension spring. This is a new replacement unit.SHIPPING AVAILABLE WORLDWIDE ON THIS PRODUCTUse the drop down menu below to select your shipping location.
-
This is a Officially licensed GM Restoration Parts Reproduction standard fuel filler cap for 1967 1968 Camaro standard models from OER. This gas cap was standard on all 1967-68 models and comes finished in factory primary so it is ready to paint to the desired color.SHIPPING AVAILABLE WORLDWIDE ON THIS PRODUCTUse the drop down menu below to select your shipping location.
-
This is a new replacement 67-68 Camaro Supoer Sport gas cap. This is an officialy licensed GM reproduction part.SHIPPING AVAILABLE WORLDWIDE ON THIS PRODUCTUse the drop down menu below to select your shipping location.
-
Officially licensed GM Restoration Parts Reproduction "rs" fuel filler cap for 1967-68 Camaro RS models. Each cap features a chrome outer ring and chrome "rs" bar logo over semi-flat black background as original. Also includes the correct filler neck to rear body panel attachment cable for a complete replacementOfficially licensed GM Restoration Parts Reproduction "rs" fuel filler cap for 1967-68 Camaro RS models. Each cap features a chrome outer ring and chrome "rs" bar logo over semi-flat black background as original. Also includes the correct filler neck to rear body panel attachment cable for a complete replacementSHIPPING AVAILABLE WORLDWIDE ON THIS PRODUCTUse the drop down menu below to select your shipping location.
-
Officially licensed GM Restoration Parts Reproduction of the rare optional 1967-68 Bow Tie locking gas cap finished with a high quality chrome edge. The center features the Chevrolet Emblem in polished chrome, also includes two pre-coded keys.
SHIPPING AVAILABLE WORLDWIDE ON THIS PRODUCTUse the drop down menu below to select your shipping location. -
This is a new replacement clip set for use on the vinyl top used on 67-73 Camaro and Firebird.
-
This is a rear upper body panel for 67-69 camaro and firebird.
-
This is a new 4 pc fender bar mounting hardware kit for use on the 1967 - 1969 Firebird and Trans Am models.
-
New antenna mast bezel. Exact fit for all 67 - 68 models. This bezel is for front fender mount antennas only. Works great for all AM and AM / FM original type antennas. Replaces original GM part number 3897333 perfectly.
-
New super cool cowl hood rear filler. Got a cowl hood on your car and dont want to do the flapper set up? Stop staring at the open hole at the rear of your cowl hood. Heres the answer, this new filler panel mounts to existing holes in all cowl hoods. Comes in raw galvanized steel and can be painted or coated if you so choose. Includes mounting hardware.
-
New correct mounting strip bracket for your 67-69. This is the long bracket or track required to mount all standard long rocker moldings. Exact fit for all models, check Photos. Two required per car, sold as each.
-
1967 - 1969 Camaro lower body side rocker panel moldings.
Sold as a PAIR Left & Right
GM Part # 3904540
NOTE These are produced from the company which supplied the units to GM while GM still offered them for sale. Our supplier bought the remaining stock pile of these units and indeed the real deal.Shipping to USA only on this item
-
1967 - 1968 Camaro Rally Sport Door Chrome Molding Rivet Set
-
New reproduction chrome hood hinges for first generation Firebird and Camaro models!
These hinges feature the following specs:
- Original gauge material.
- Accurately stamped from high strength steel.
- Quality heavy construction with hardened pivot points.
- OE quality.
- All parts polished then chrome plated by a TS/16-944 Certified OE supplier.
As always FREE SHIPPING INSIDE THE USA
- Original gauge material.
-
This is a full kit for use on the first generation Fbody
1967 1968 1969 Camaro and Firebird
These triple plated chrome fender to radiator support fender bar braces and installation hardware are a great way to dress out your engine bay in minutes! Set includes chrome plated hardware kit for a clean matching install at home!
Polished triple chrome plated after-market style for dress up or show.
Sold as pair.
Includes 4 matching chrome mounting bolts.As always FREE SHIPPING inside the USA -
Complete Camaro 302 Cowl Induction System. Includes all our individually available superior quality parts: Faithfull reproduction air cleaner body with four barrel carb base (Rochester/Holley), attached breather tube (1" hose), stainless spark arrestor, high pleat count performance air filter, original gauge gloss black lid, 302 extension ring, cowl seal flange, flange to hood seal, flapper valve seal, flapper valve, valve retainers, flapper frame and seal, OE quality licensed solenoid (with part number) and firewall relay, concourse quality FACTORY-FIT(c) wiring harness, hood grommet, cowl induction throttle arm with hardware, switch and retainer, correct small block valve cover elbow and grommet. All hardware and installation instructions included. Original high gloss coated black finish.
As always FREE SHIPPING inside the USA
-
Complete Camaro 396 Cowl Induction System. Includes all our individually available superior quality parts: Faithfull reproduction air cleaner body with four barrel carb base (Rochester/Holley), attached breather tube (1" hose), stainless spark arrestor, high pleat count performance air filter, original gauge gloss black lid, 396 extension ring, cowl seal flange, flange to hood seal, flapper valve seal, flapper valve, valve retainers, flapper frame and seal, OE quality licensed solenoid (with part number) and firewall relay, concourse quality FACTORY-FIT(c) wiring harness, hood grommet, cowl induction throttle arm with hardware, switch and retainer, correct big block valve cover elbow and grommet. All hardware and installation instructions included. Original high gloss coated black finish.
As always FREE SHIPPING inside the USA
-
For use on 1967 - 1968 Camaro
License plate bumpers for the front or rear license plate on 67-68 Camaro.. Set of 3.
Units fit
1967 1968
Camaro
And many other GM models
Shipping is available worldwide
Use the drop down menu below to select ship to location. -
For use on 1969 Camaro New rear license plate tag door bumpers for your Camaro.
Exact fit for all 69 models.
Sold as a set of two.
Super easy install, just push into place.
FREE SHIPPING inside the USA
-
For use on 1967 - 1968 Camaro
Produced by Muscle Car industries
Replaces GM Part Number, LH 5959355 and RH 5959356
This is a set of tail light to body gaskets for 67 and 68 Camaro.
These gaskets are made to O.E. specs for a perfect seal with exact details. New heavy rubber molded correct style tail light lens seals. Exact fit for all 67 & 68 Camaro models. This new molded design helps keep water out. Factory profile, fit, and appearance.
Sold as a pair.
Units fit
1967 1968
Camaro -
This is a set of tail light to body gaskets for 1969 Camaro.
Produced by Muscle car Industries
These gaskets are made to O.E. specs for a perfect seal with exact details. New heavy rubber molded correct style tail light lens seals. Exact fit for all 1969 Camaro models. This new molded design helps keep water out. Factory profile, fit, and appearance.
Sold as a pair.
Units fit
1969
CamaroAs always FREE SHIPPING inside the USA
-
This is a 24 pc screw kit used to mount the weather seal retainer channel onto the body of the 1967 - 1969 Camaro and Firebird.
FREE USA SHIPPING
Worldwide Shipping Also Available
-
For use on 1969 Camaro set of replacement tail light gaskets 1969 camaro only
FREE USA SHIPPING
Worldwide Shipping Also Available
-
For use on 1967 1968 1969 Camaro Firebird. Seals prevent water drainage into rear of body and trunk area. Molded rubber with stamped steel spine as original. RH and LH, pair. GM Group #: 13.352 GM Part #: RH 7645828, LH 7645829 Officially Licensed GM Restoration Parts.
FREE USA SHIPPING
Worldwide Shipping Also Available
-
For use on 1967 - 1968 Camaro Firebird Trans Am. 12 piece body plug set packaged for 67-68 F-body. Technically correct reproduction body plugs include numerals and text embossing as original. Officially Licensed GM Restoration Parts.
FREE USA SHIPPING
Worldwide Shipping Also Available
-
For use on 1969 Camaro Firebird Trans Am. 12 piece body plug set packaged for 1969 F-body. Technically correct reproduction body plugs include numerals and text embossing as original. Officially Licensed GM Restoration Parts.
FREE USA SHIPPING
Worldwide Shipping Also Available
Use the drop down menu box for out of country shipment.
-
For use on 1967 - 1969 Camaro Firebird These are replacement weather seals that sit on the door jam ledge at the rear quarter glass
For use on 1967 - 1969 Camaro and Firebird
By: Classic Headquarters
These rubber seals go on top of the door jam striker area on a 67-69 Camaro and Firebird. U shaped seal screws on and sits on the ledge where the rear quarter glass rolls down.
Quarter window U-jamb seals with steel inserts as original. Superior quality rubber compounds to all competing products. RH and LH pair.
Officially Licensed GM Restoration Parts.Replaces GM #'s 7731446 & 7731447
Sold as a pair.
Units fit
1967 1968 1969
Camaro Firebird Trans Am
Shipping is available worldwide
Use the drop down menu below to select ship to location. -
For use on 1967 1968 1969 Camaro Firebird Trans Am. Correct screw set for mounting rear quarter window "U" jamb seals.
FREE USA SHIPPING
Worldwide Shipping Also Available -
This is a new replacement bump stop kit for use on 1967 1968 1969 Camaro and Firebird.
This is a 16 pc kit.
FREE SHIPPING INSIDE THE USA
Worldwide Shipping Also Available -
For use on 1967 - 1968 Camaro set of replacement taillight gaskets 67 - 68 camaro only Produced by Classic Headquarters
FREE SHIPPING INSIDE THE USA
Worldwide Shipping Also Available
-
This is for a 1967 1968 1969 Firebird 23" long retainer clip. Sold individually or as a complete car set (4)
-
Door lock pillar weather seals pair (Left & Right)
1967 GM F-body Camaro & Firebird 2-door hardtop and convertible.
Units mount on the lower leading edge of quarter-window. Mounts on body. Durable EPDM rubber with stainless steel cores.
See part # MM-ALP 11 for '68-'69 GM F-body cars.
Sold as a pair. Left & RIght Sides
AS ALWAYS FREE SHIPPING INSDIE THE USA.
-
This is a new replacement side mirror gasket for use on the driver side mirror WITH remotr adjustement.
Mirror Pad. For mirror with remote control. 1-1/4" wide X 5-1/2" long. Each
Note only the driver side mirror is remote adjustable so one needed per car. We do offer a new replacement passenger side non remote control style also.See other items
As always FREE SHIPPING inside the USA on this itemWorldwide shipping available also! -
This is a new replacement side mirror gasket for use side mirrors WITH OUT remotre adjustement.
Mirror Pad. Side Mirrors - Measures: 1-1/8" wide X 5" long
For use on non remote control mirrors 1967 1968 1969 Camaro & Firebird Models.
As always FREE SHIPPING inside the USA on this itemWorldwide shipping available also! -
This is a pair of exterior door handle gaskets for use on 1967 1968 1969 Camaro and Firebird
This 4 pc set does both driver and passenger side door handles.
Produced by Metro Moulded units offer a standard 15 year replacement warranty.
Units protect the paint on your doors from the metal ends of the exterior door handles and create a wind and water barrier preventing leaks within the door itself.
As always FREE Shipping inside the USA
-
This is an Antenna Base Pad for use on 1967 1968 1969 Camaro and Firebird
1-9/16" Outside Diameter,
1-1-16" Inside Diameter
Produced by Metro Moulded units offer a standard 15 year replacement warranty.
Prevent rattles and paint damage by replacing this new replacement weather seal hasket for the antenna base on your 1967 1968 1969 Camaro with external antenna.
As always FREE Shipping inside the USA
-
This is a new replacement rubber bump stop kit for use on 1967 - 1969 Camaro and Firebird. This is a 16 pc kit. When installing new replacement weather stripping, replacing the bump stops is also needed. These are simple to install and provide the factory gapping which will prevent premature aging of new weather seals.
Kit Includes the following bump stops:
- Door Bumpers
- Trunk Lid Bumpers
- Hood Bumpers
- Ashtray Bumpers
- Console Lid Bumpers
- Glove Box
MADE IN THE USA!
-
Door lock pillar weather seals pair (Left & Right)
1968 - 1969 GM F-body Camaro & Firebird 2-door hardtop and convertible.
Units mount on the lower leading edge of quarter-window. Mounts on body. Durable EPDM rubber with stainless steel cores.
See part # MM-ALP 11-A for '67 GM F-body cars.
Sold as a pair. Left & RIght Sides
AS ALWAYS FREE SHIPPING INSDIE THE USA.
-
For use on 1967 Camaro Models
This is a pair Left & Right of the front side window vent weather seals (weather stripping) Sold as a pair and produced by Metro Moulded. Eliminate wind noise and also water leaks with new replacement seals from Fbodywarehouse. Units install easily at home and preserve your car while increasing it's value,
Produced by Metro Moulded.
Produced by Metro Moulded and backed by a 15 year replacement warranty.
Units fit
1967
Camaro -
This is a new replacement rubber bump stop kit for use on 1967 - 1969 Firebird. This is a 14 pc kit. When installing new replacement weather stripping, replacing the bump stops is also needed. These are simple to install and provide the factory gapping which will prevent premature aging of new weather seals.
Kit Includes the following bump stops:
- Door Bumpers
- Trunk Lid Bumpers
- Hood Bumpers
- License Plate Bumpers
-
1969 - 1970 Firebird Trans Am front marker light trim bezel housing.
Gm unit in nice shape with no cracks etc.
Interchange should be 1969 1970 1971 1972 Firebird Trans Am
Install and go.
As always FREE SHIPPING inside the USA
-
Complete Camaro 350 Cowl Induction System. Includes all our individually available superior quality parts: Faithfull reproduction air cleaner body with four barrel carb base (Rochester/Holley), attached breather tube (1" hose), stainless spark arrestor, high pleat count performance air filter, original gauge gloss black lid, 350 extension ring, cowl seal flange, flange to hood seal, flapper valve seal, flapper valve, valve retainers, flapper frame and seal, OE quality licensed solenoid (with part number) and firewall relay, concours quality FACTORY-FIT(c) wiring harness, hood grommet, cowl inductionn throttle arm with hardware, switch and retainer, correct small block valve cover elbow and grommet. All hardware and installation instructions included. Original high gloss coated black finish.
As always FREE SHIPPING inside the USA