Sheet Metal
Rust, bondo and fiberglass work, previous accidents are all reasons why your first generation Camaro or Firebird will need sheet metal. We are expanding our lineup to cover all of your sheet metal and replacement panel needs!
As always Shipping inside the USA is free on all of our products
-
1967 - 1981 Camaro Trans Am NEW Radiator Support Bushing Kit. This item is a must have for anyone rebuilding your car's front end. One of the fastest areas of wear out is these bushings.
This kit includes all the correct bushings, heat treated bolts, and washers to remount the radiator core support to the front frame rails and front clip.. -
These are new replacements rear quarter panel skin drops. Available as a set or individually.
-
When you work on your Camaro don't risk scratching the paint! Use these quality fender covers!
-
When you work on your Firebird / Trans-Am don't risk scratching the paint! Use these quality fender covers!
-
This is a1969 Firebird reproduction front fender.
-
1967 - 1968 Firebird Front Fender Reproduction
-
1967- 1968 Firebird Front Fender Reproduction (using GM tooling)
-
1967 - 1969 Outer Side Cowl Panel Assembly
-
1967 Firebird Quarter Panel Skin Reproduction.
-
1968 Firebird Quarter Panel Skins Reproduction
-
1969 Firebird Quarter Panel Skins Reproduction
-
1967 - 1968 Firebird Camaro Outer Wheelhouse Panels
-
1969 Firebird Camaro Outer Wheelhouse Panel Reproduction.
-
This is a 1967 - 1968 Firebird Fuel Door tension spring. This is a new replacement unit.SHIPPING AVAILABLE WORLDWIDE ON THIS PRODUCTUse the drop down menu below to select your shipping location.
-
This is a Officially licensed GM Restoration Parts Reproduction standard fuel filler cap for 1967 1968 Camaro standard models from OER. This gas cap was standard on all 1967-68 models and comes finished in factory primary so it is ready to paint to the desired color.SHIPPING AVAILABLE WORLDWIDE ON THIS PRODUCTUse the drop down menu below to select your shipping location.
-
This is a new replacement 67-68 Camaro Supoer Sport gas cap. This is an officialy licensed GM reproduction part.SHIPPING AVAILABLE WORLDWIDE ON THIS PRODUCTUse the drop down menu below to select your shipping location.
-
Officially licensed GM Restoration Parts Reproduction "rs" fuel filler cap for 1967-68 Camaro RS models. Each cap features a chrome outer ring and chrome "rs" bar logo over semi-flat black background as original. Also includes the correct filler neck to rear body panel attachment cable for a complete replacementOfficially licensed GM Restoration Parts Reproduction "rs" fuel filler cap for 1967-68 Camaro RS models. Each cap features a chrome outer ring and chrome "rs" bar logo over semi-flat black background as original. Also includes the correct filler neck to rear body panel attachment cable for a complete replacementSHIPPING AVAILABLE WORLDWIDE ON THIS PRODUCTUse the drop down menu below to select your shipping location.
-
Officially licensed GM Restoration Parts Reproduction of the rare optional 1967-68 Bow Tie locking gas cap finished with a high quality chrome edge. The center features the Chevrolet Emblem in polished chrome, also includes two pre-coded keys.
SHIPPING AVAILABLE WORLDWIDE ON THIS PRODUCTUse the drop down menu below to select your shipping location. -
This is a pair of new replacement fuel tank straps for use on 1967 - 1969 Camaro and Trans Am. Produced from pre-formed steel and zinc coated for an original appearance.Sold as a pair.SHIPPING AVAILABLE WORLD WIDE ON THIS PRODUCT!Use the droop down menu below
-
This is a pair of new replacement mounting braces used to secure the fuel tank EIP coated to prevent rusting.SOLD AS A PAIRSHIPPING AVAILABLE WORLDWIDE ON THIS PRODUCTUse the drop down menu to select shipping location
-
This is a new replacement fuel door for use on 1969 Camaro (All Models) Includes hinge assembly. Stamped to proper GM specs does not include mounting hardware.SHIPPING AVAILABLE WORLDWIDE ON THIS PRODUCTUse the drop down menu to select shipping location
-
This is a 100% correct reproduction of the factory rubber bushings for 1967 - 1981 Firebird Trans Am! These are made to replicate the original GM body bushing in every way. The kit also includes the radiator support bushings! There are 12 bushings per kit.
These bushings and hardware replace the factory bushings which connect the front sub-frame to the body hull of the car.Use the drop down menu below to select year desired!
SHIPPING AVAILABLE WORLDWIDE, USE DROP DOWN MENU TO SELECT SHIPPING LOCATION
-
1967 - 1969 Camaro Firebird Radiator Core Support NEW!
-
1967 - 1968 - 1969 Camaro Reproduction Battery Tray!SHIPPING AVAILABLE WORLDWIDE, USE DROP DOWN MENU TO SELECT SHIPPING LOCATION
-
1967 - 1968 Camaro Rear Body Panel NEW!
-
1969 Camaro Rear Body Panel NEW!
-
This is a rear body panel for 67-69 firebird
-
This is a rear upper body panel for 67-69 camaro and firebird.
-
this is a 67-68 cakmaro inner valance panel
-
This is a rear inner valance panel for 1969 Camaro.
-
1967-76 FRONT STABILIZER BUSHING
OER reproduction front bumper stabilizer for use on all 1967-76 Firebird models. The rubber biscuit separates the front bumper from the mounting brace. 2 required per vehicle. -
This is a new 4 pc fender bar mounting hardware kit for use on the 1967 - 1969 Firebird and Trans Am models.
-
1967 - 1969 Camaro - Firebird Complete Body Bushing set. This set has all bushings needed for all 6 body bushing points. Two for the radiator core support and four for the sub frame. Premium quality set. Bushing kit comes packaged in poly bag ready to ship. * Replaces GM Part #s 3893159, 3928380, 3901361, 3893156, and 3914802
-
Floor And Trunk Pan Body Metal Oval Drain Plug
-
New reproduction chrome hood hinges for first generation Firebird and Camaro models!
These hinges feature the following specs:
- Original gauge material.
- Accurately stamped from high strength steel.
- Quality heavy construction with hardened pivot points.
- OE quality.
- All parts polished then chrome plated by a TS/16-944 Certified OE supplier.
As always FREE SHIPPING INSIDE THE USA
- Original gauge material.
-
This is a full kit for use on the first generation Fbody
1967 1968 1969 Camaro and Firebird
These triple plated chrome fender to radiator support fender bar braces and installation hardware are a great way to dress out your engine bay in minutes! Set includes chrome plated hardware kit for a clean matching install at home!
Polished triple chrome plated after-market style for dress up or show.
Sold as pair.
Includes 4 matching chrome mounting bolts.As always FREE SHIPPING inside the USA -
For use on 1969 Camaro New rear license plate tag door bumpers for your Camaro.
Exact fit for all 69 models.
Sold as a set of two.
Super easy install, just push into place.
FREE SHIPPING inside the USA
-
For use on 1967 - 1981 Camaro Firebird Trans Am. New rear inner rocker panel drain plug rubber flap covers for your classic. Super easy to install, just push and snap into place. Sold by the pair, does one car.
Units fit:
1967 1968 1969 1970 1971 1972 1973 1974 1975 12976 1977 1978 1979 1980 1981
Camaro Trans Am Firebird
Shipping is FREE inside the USA
Worldwide Shipping Available -
This is a new replacement BLACK outer NON AC Car heater and fan delete plate. For use on 1967 1968 1969 Camaro with Air Conditioning.
Installing this closes the holes for the inner heater box and fan on the firewall. This is an accurate reproduction and is clean unlike many home made kits this is the way to make it look like a GM delete.
FREE USA SHIPPING
Worldwide Shipping Also Available
-
For use on 1967 - 1968 Camaro Firebird Trans Am. 12 piece body plug set packaged for 67-68 F-body. Technically correct reproduction body plugs include numerals and text embossing as original. Officially Licensed GM Restoration Parts.
FREE USA SHIPPING
Worldwide Shipping Also Available
-
For use on 1969 Camaro Firebird Trans Am. 12 piece body plug set packaged for 1969 F-body. Technically correct reproduction body plugs include numerals and text embossing as original. Officially Licensed GM Restoration Parts.
FREE USA SHIPPING
Worldwide Shipping Also Available
Use the drop down menu box for out of country shipment.
-
Heavy stamped steel ring reinforces shifter hole in floor; for mounting automatic shifter and 3 & 4 speed shift boot retainer. Ring weld to bottom side of floor.For use on 1967 1968 1969 Camaro and Firebird
FREE USA SHIPPING
Worldwide Shipping Also available
-
Fbodywarehouse is pleased to offer our clients new reproduction rear seat support braces for 1967-1969 models. Replace your bent, rusted, or missing originals with this brand new reproduction set by spot welding them to the rear floor board and package shelf. Braces are designed to attach the package tray to the under seat pan on coupe models only.
-
This is a pair of new replacement trunk hinges for use on your 1967 1968 1969 Camaro / Firebird / Trans Am. Sold as a pair left and right.
-
Reproduction of the original package shelf panel brackets, also known as braces, or trunk lid hinge extensions for 1967-69 coupe models. This bracket mounts underneath the rear package shelf panel and attaches to the rear wheelhouse and the back seat brace. Replace your rusted originals with this quality reproduction. For coupe models only.
-
Maintain the structural integrity of your early model Firebird and Camaro by replacing damaged, bent or rusted frame rails. Manufactured to replace the original rails exactly. Includes correct configuration for each year. Each frame rail covers the entire trunk area from front to rear tail panel. This reproduction is manufactured from the highest quality steel available. This is a DRIVER SIDE (Left Hand Unit)
-
Maintain the structural integrity of your early model Firebird and Camaro by replacing damaged, bent or rusted frame rails. Manufactured to replace the original rails exactly. Includes correct configuration for each year. Each frame rail covers the entire trunk area from front to rear tail panel. This reproduction is manufactured from the highest quality steel available. This is a PASSENGER SIDE (Right Hand Unit)