Hood Insulation & Clips
1974 1975 1976 1977 1978 Firebird and Trans Am hood insulation blankets are a great way to prevent heat from slowly baking the hood decals and parts. The engine bay puts off a lot of heat and hence without this blanket your bird is in the over so to speak. All Trans Am and Firebird hoods came standard pre-stamped for the hood insulation so even if yours did not come stock with one you can add one in no time at home!
As always shipping is FREE inside the USA.
-
This is a full 1973 – 1981 Trans Am Bump Stop set.
This set replaces all the old factory bump stops.
Set includes the following items.
Door bump stops,(4)
License Plate Bumpers (2)
Trunk lid bump stops,(2)
Glove box bumpers (2)
Ashtray bumpers (2)
Front fender to hood bump stops (6)
Hood height adjuster stop pads(2)
Install is simple, and takes a very short time. This is always a good idea after paint to ensure proper fit and function of the doors, and trunk, as well as the hood
As always shipping is FREE inside the USA
-
Hood Insulation Blanket + New Retainer clips for 1977 – 1981 Trans Am. Reduce engine heat and engine bay noise, clean up the appearance of your engine bay!
-
Hood Insulation Blanket + New Retainer clips for 1970-1981 Firebird. Reduce engine heat and engine bay noise, clean up the appearance of your engine bay! SHIPPING INCLUDED!
-
This is a New GM hood release cable for Trans Am and Firebird 77-81 This is the nose mounted hood release cable. These were prone to breaking down over the years. Install is quick and easy!Unit includes the T shaped pull handle.
-
This is a REAR firewall cowl weather seal set for
1970 - 1981 Camaro1977 - 1981 Trans Am / Firebird
This seal prevents leaves and debris from entering the engine bay and wind and noise from exiting the engine bay along the cowl panel. Set includes mounting clips already installed.
Please note various years use a different seal.
USE THE DROP DOWN MENU TO SELECT YOUR EXACT YEAR AND MODEL.1970 - 1981 Camaro use Part # MI-CS 15-C-&D
1977 - 1981 Trans Am Firebird use Part # MI-CS 15-C-&D
This is a 3 piece unit where the 2 smaller units fit on the side itself. The longer middle section mounts to the rear underside of the roof.
1970 - 1976 Trans Am used a 1 piece seal.
-
This is a set of 15 Hood Insulation Blanket retainer clips for 1970 - 1992 Camaro or Trans Am.
-
These seals attach to the inner fenders and cover the upper A-frames protecting the engine compartment from various road debris such as water, salt, etc, keep your cars engine bay cleaner and prevent rust and chips in your car's engine bay.
-
This is a GM Trans Am hood release mechanism. Unit will fit the following models:Trans Am Firebird Formula1970 1971 1972 1973 19741975 1976 1977 1978 19791980 1981Unit operates well will need cleaned and oiled prior to install. Units are used and directly off the car.As always FREE SHIPPING inside the USA.
-
This is a 1977 - 1978 Firebird Trans Am Hood Release Cable Mounting Bracket
GM Part # 547861
-
1977 - 1981 Firebird Trans Am Used GM Hood Release Cable
-
1970 - 1981 Camaro Trans Am Hood Bumper Adjuster Set!
-
This weather seal mounts onto the front underside ledge of the hood on 1977 - 1981 Firebird and Trans Am models with air conditioning.
When the hood is cloded this creates a seal between the hood and the radiator core support.
Produced by Metro Moulded this weather strip offer superior fit and function. Includes the mounting push pins installed and installs in about 3 minutes at home.
-
This is a new replacement hood to cowl panel seal for use on 1970 - 1976 Firebird and Trans Am models. Unit installs onto the underside of the hood and included the mounting clips already set into place for a quick and easy installation at home.
Produced by Metro Moulded this seal features an excellent fit and a 15 year replacement warranty!
-
This is a pretty rare item and a great addition to any Fbody.
This is a GM factory hood lamp option. Common mostly on Camaro 1970 - 1981 BUT simple to install on Firebird Trans Am. unit mounts to the under side of the hood framework by two small bolts or screws. The mounting hardware and hood are the ground and it has a single power lead. Power is turned on or off via a mercury switch inside the bulb holder just like the trunk light found on these cars. includes a new bulb and wiring as shown.
As always FREE SHIPPING inside the USA
-
Reproductions of the original windshield washer nozzles for 1977 - 1981 Firebird and Trans Am models.
Sold as a pair.
Replace your missing or damaged originals with these quality reproductions.
These install on the underside of the hood and the windshield washer hoses connect to them. These nozzles then direct the fluid into the proper placement on the windshield when the pump is activated.
As always FREE SHIPPING inside the USA.
-
Reproductions of the original windshield washer nozzles for 1970 - 1976 Firebird and Trans Am models.
Sold as a pair.
Replace your missing or damaged originals with these quality reproductions.
These install on the underside of the hood and the windshield washer hoses connect to them. These nozzles then direct the fluid into the proper placement on the windshield when the pump is activated.
As always FREE SHIPPING inside the USA.
-
This is a GM Trans Am hood release mechanism. Unit will fit the following models:Trans Am Firebird Formula1970 1971 1972 1973 19741975 1976 1977 1978 19791980 1981Unit has been chemical dipped and is in true bare metal with a dusting of clear coat to prevent rusting. Units are clean and ready to install will come properly oiled..As always FREE SHIPPING inside the USA.
-
This is GM windshield washer bottle hose retainer clip set for 1980 - 1981 Camaro and Trans Am.