Moldings & Trim
On your early second generation Camaro 1970 – 1973 we offer a wide selection of both moldings for the exterior and also the hardware to properly mount them onto the car. From front to rear you can find the general exterior items you need here.
As always FREE SHIPPING in the USA
- 1
- 2
-
This is a full window trim clip set for the front and rear windows on 1970 – 1981 Trans Am and Camaro.
-
This is a set of 12 door top molding clips for 1970-1981 Camaro and Trans Am.
-
Set of 6 replacement mounting screws for 1970-1981 Camaro and Trans Am Filler Panel.
-
This is a replacement set of clips and studs for for 1970-1981 Camaro Trans Am Door Top Chrome Molding.
-
This is a 1970 - 1973 Camaro RS (Rally Sport) Lower Valance. Unlike the standard panel, this panel does not house the the park lamp /turn signal assemblies. It is finished in a black primer color.This panel is produced in high grade steel and is EDP coateAs always FREE SHIPPING inside the USA
-
This is a set of two 1970 - 1973 Camaro Head Light Shrouds (Bezels)
Sold as a pair left and right these units are top quality and fit like a glove. Units are produced in correct aluminum materials for a showroom appearance!
It is the attention to the details which make you 1970 1971 1972 1973 Camaro really stand out in a crowd!
FREE SHIPPING inside the USA included in price!
-
This is a exterior body molding bullet end for 70-81 Trans Am and Camaro modelswith the 1/2 inch wide exterior chrome molding. This is for use on the aluminum pop rivit style door, fender and rear quarter panel bump gaurd that ran horizontal along the car. NOT reproduced.
As always FREE SHIPPING inside the USA
-
This is a exterior body molding bullet end for 70 - 81 Trans Am with the 1/2 inch wide exterior chrome molding. These end pieces screw into the molding strip and butt up against the filler strip.
THIS IS FOR 1 UNIT ONLY, PLEASE SELECT THE QUANTITY YOU NEED.
We have four styles available, this is for style 3. Units are used, and will have some wear or light pitting.
WORLDWIDE SHIPPING AVAILABLE ON THIS PRODUCT!
-
This is a set of 2 NEW blow out tabs for 1970 - 1981 Camaro and Trans Am.
These mount on the roof rail weather seal channels by 2 pop rivets. The prevent the windows from pushing out at highway speeds. Factory GM units were rubber coats and often peeled and then rusted.
We have an installation video in the Video Library for ease of install!
USA FREE SHIPPING!
Worldwide Shipping Also Available
-
New GM head light retainers PAIR74-81 Camaro74-76 Firebird Trans Am
-
For use on 1970 - 1981 Camaro Firebird Trans Am models with the deluxe exterior molding package.
Cast original hard die cast material. Heavy chrome plated and show polished. Exact reproductions these units mount UNDER the weather seal retainer trims. These units provide the chrome accent molding trim that run up and down the B pillar posts at the backside of the side glass.
FREE USA SHIPPING
Worldwide Shipping Available
Use the drop down menu to select out of country locations
-
New replacement door edge guard molding that runs vertically up and down the leading edge of the door.
-
This is a pair Left / Right of the lower front windshield trim for 70 - 81 Camaro and Trans Am.
Units cover the lower windshield at the cowl panel and keep debris and such from reaching the lower windshield.Install takes about 3 minutes and fit and function of units is excellent.USA SHIPPING INCLUDED IN PRICE -
This is a SINGLE L trim piece of rear window trim corner trims for 1970 1971 1972 1973 1974 Camaro and Firebird / Trans Am with the flat rear window.
Unit are used and have some light scratches.As always FREE SHIPPING INSIDE THE USA -
These are used GM 1973 - 1981 Trans Am / Firebird / Camaro hard top outer body hull weather seal retainers. These are the channels which the actual weather seal sits within and these screw to the tub of the car. The run up the A pillsr (windshield post) and across the top of the doors.
NOT REPRODUCED
SOLD AS A PAIR
Units fit 1973 1974 1975 1976 1977 1978 1979 1980 1981
Camaro Firebird Trans Am Hard Top Models.
FREE USA SHIPPING
Worldwide Shipping Available
Use the drop down menu to select out of country locations
-
1970 - 1981 Camaro Trans Am Used cowl panel screens.
Used GM cowl panel screens mount on to all 1970 -1 981 Camaro and Trans Am models. These are good to excellent shape may have a ding here or there but will be a good to great quality piece eady to install. Units are cleaned and dusted in a satin black.
FREE USA SHIPPING
Worldwide Shipping Also Available
-
1970 - 1981 Hard Top Weather Seal Retainers (PAIR) Left and right. These mount onto the B pillar channel right behind the side window glass on you Camaro Firebird Trans Am.
This screws to the body and the weatherseal then snaps into this channel. Not reproduced. Units will be cleaned and exposed areas will be polished prior to shipment so they are out of the box and onto the car.
FREE USA SHIPPING
Worldewide Shipping Aslos Available.
-
1970 - 1981 Camaro Trans Am B-Pillar Exterior Trim Molding.
This pair left and right fit under the B pillar weather seal retainer channels and provide a 1/3 inch or so accent bead that runs up and down on the exterior of the body at the side glass.
Units are good General Motors units which will have the areas that are shown when installed will be hand polished for a great shine and and be ready to install out of the box.
As Always FREE SHIPPING IN THE USA
Worldwide Shippign Also Available -
This is a new replacement exterior door handle gasket used on 1970 - 1981 Camaro and Trans Am.
-
This is a new replacement clip set for use on the vinyl top used on 67-73 Camaro and Firebird.
-
This is a used GM 4 speed transmission hump sheet metal section for 1970 - 1981 Firebird Trans Am Camaro.
As always FREE SHIPPING inside the USA
-
1970 - 1981 Camaro Trans Am Driver Side Mirror GM unit.
Fits all 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981
Camaro Trans Am Firebird -
This is the door jamb vent assembly for 1970 - 1981 Camaro Trans Am. This is the unit located above the door striker bolt. Sold Individually or as a pair.These are very high quality reproductions!
Use drop down menu below to select individual or pair needed.
FREE USA SHIPPING
Worldwide Shipping Available
Use the drop down menu to select out of country locations
-
1970 - 1981 Camaro Trans Am Felt & RIght Front Windshield Window Trim.Units are GM and have great shine BUT both have dings and being sold as "seconds" Great for the guy on a budget as price is SHIPPING INCLUDED in the USA!
-
This is a PAIR of fender tip chrome which is a section of the deluxe exterior molding package on the 70 - 81 Camaro model lineAs always FREE SHIPPING isnide the USA
-
This is a pair of new replacement deluxe exterior moldings. "Rain gutters"
-
1970 - 1973 Camaro Rally Sport Center Grill Divider Rubber Inlay
-
For 1970 1971 1972 1973 Camaro Models
Correct bushings and cushions for all 70-73 Camaro's to correctly mount radiator support. Bushing set is used for the frame brackets to the vertical mounting point on radiator support. GM Group #'s:1.270 & 9.023 GM Part #'s: 3962950 bushing, 3893159 cushion
FREE USA SHIPPING
Worldwide Shipping Also Available
Use the drop down menu for international orders.
-
This is a set of reproduction inner & outer door window sweeps with THIN chrome bead. These are the seals the go on the outside of the door and screw on to the hull of the door and have a small chrome strip that runs along the door. These are sometimes called the window felts. They squeegee the outside of the window when the glass is rolled down.
These are correct O.E. style felts. MCI's window felts are made from new tooling to ensure a proper fit and appearance. Four piece kit including correct original round exterior bead chrome and correct flat chrome bead on the door panel mounted inner weather seal sweep.
Replaces GM Part #
9612539, 9612538, 8808230, 8808231AS ALWAYS FREE SHIPPING INSIDE THE USA -
This is a set of reproduction outer door window sweeps with THIN chrome bead. These are the seals the go on the outside of the door and screw on to the hull of the door and have a small chrome strip that runs along the door. These are sometimes called the window felts. They squeegee the outside of the window when the glass is rolled down.
These are correct O.E. style felts. MCI's window felts are made from new tooling to ensure a proper fit and appearance. TWO piece kit including correct original round exterior bead chrome.
Replaces GM Part #9612539 and 9612538AS ALWAYS FREE SHIPPING INSIDE THE USA -
This is a set of reproduction inner & outer door window sweeps with FLAT chrome bead. These are the seals the go on the outside of the door and screw on to the hull of the door and have a small chrome strip that runs along the door. These are sometimes called the window felts. They squeegee the outside of the window when the glass is rolled down.
These are correct O.E. style felts. MCI's window felts are made from new tooling to ensure a proper fit and appearance. Four piece kit including correct original FLAT exterior bead chrome along with the correct door panel mounted inner sweep with flat chrome bead.
Replaces GM Part #
9612536, 9612537, 8808230, and 8808231AS ALWAYS SHIPPING IS FREE INSIDE THE USA
-
This is a set of reproduction outer door window sweeps with FLAT WIDE chrome bead. These are the seals the go on the outside of the door and screw on to the hull of the door and have a small chrome strip that runs along the door. These are sometimes called the window felts. They squeegee the outside of the window when the glass is rolled down.
These are correct O.E. style felts. MCI's window felts are made from new tooling to ensure a proper fit and appearance. TWO piece kit including correct original FLAT WIDE exterior bead chrome.
Replaces GM Part #
9612536 and 9612537FREE SHIPPING inside the USA -
This is is a 4 pc piece set of non chrome bead outer window sweeps for 70-81 Camaro and Trans Am. This 4 pc set also comes with the door panel mounted inner window sweeps as well.These are correct for cars with the exterior chrome package or for those looking for a "blacked out appearance (chrome delete)DELUXE MOLDING PACKAGE: If your car has the thick chrome hood wrap, fender tips chrome accents and the door top belt molding which is held onto the door via a series of clips this is the style you will need. The video below shows this Deluxe Package on a 70's Firebird. If you are not sure if your car has the deluxe package please watch the video below.BLACKED OUT LOOK: Also note you can install these as shown in the picture on a car without the exterior body molding and eliminate the chrome bead on standard issue cars if you are looking for a smoother "blacked out look"AS ALWAYS SHIPPING IS FREE INSIDE THE USA
-
This is a 5 pc set of rear window trim for 1970 - 1974 Camaro Firebird Trans Am Factory set in satin black for a custom "Blacked out" look!
-
This is a 5 pc set of FRONT window trim for 1970 - 1981 Camaro Firebird Trans Am Factory set in satin black for a custom "Blacked out" look!
-
This is a 36 pc screw kit used to mount the weather seal retainer channel onto the body of the 1970 - 1981 Camaro and Firebird /Trans Am.
New replacement full screw kit for the hard top or t-top weather seal channel retainers for the roof top of your Classic Camaro Firebird TA.
As always FREE USA SHIPPING
Worldwide SHipping Also Available!
-
This is a new replacement pair of the lower front windshield eyebrow moldings which keep dirt and debris from standing on the cowl and sheet metal directly below the windshield.For use on 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 Camaro Firebird and Trans AM models. These are often broken or missing.
-
This is a pair Left / Right of the lower front windshield trim for 70-81 Camaro and Trans Am.
-
1970 - 1992 Camaro Firebird Door Jam Vent AssemblyPAIRUsed GM unit in great shape install and go!
FREE USA SHIPPING
Worldwide Shipping Also Available
Use the drop down menu for international orders.
-
This is a 100% complete Rally Sport nose cone installation kit for all 1970 - 1976 Camaro models.
-
This is a Used GM jack foot base for use with 1970 - 1981 Camaro and Firebird Trans Am models. Great shape used GM unit. Correct GM blue in color.
-
For use on all 1970 - 1981 Camaro Firebird Trans Am. These units mount directly to the cowl panel at the base of the windshield. When installed they support the windshield at the proper height. Correct in everyway these units replace GM Part # 9624995
Sold as a pair
(Does ONE full car)
As always FREE Shipping Inside the USA
-
This is a Camaro nose con brace which runs at the hood release down to the bottom of the core support. Exact year of donor car not known. Unit has been blasted and painted and is ready to install.
See picture.
As always FREE SHIPPING inside the USA
-
This is a pair of new replacement deluxe exterior trim moldings. These attach to the door top exterior. via a series of clips which attach tto small studs that protrude from the top of the door frame.
These are new reproduction uits in stainles and run the entire length of the door top.
We also carry the retainer clips and studs as well!
Units fit both Camaro and Trans Am 1970 - 1981.
SOLD AS A PAIR
FREE SHIPPING insid ethe USA
-
Many of the 1970 - 1981 came with a GM option "deluxe exterior molding package". This included the below items which are stainless steel accents that run across the rear lip of the hood and 2 little stubs that mounted onto the tips of the front fenders. They then extended down along the top of the door frame at the window. (We sell those also) seperately.)
This 3 piece kit includes the hood and fender moldings.
Officially Licensed GM Restoration Part®
Even if your Camaro wasn't originally equipped with the optional exterior molding package, you can still install it to your classic.. These slip down and tight olong the hood ledge and fenders so no drilling or modifications are needed for install!
NOTE: This kit will NOT fit the Firebird Trans Am model line!
As always FREE SHIPPING inside the USA
-
Many of the 1970 - 1981 came with a GM option "deluxe exterior molding package". This included the below item which is the stainless steel accent strip that ran across the rear lip of the hood.
Officially Licensed GM Restoration Part®
Even if your Camaro wasn't originally equipped with the optional exterior molding package, you can still install it to your classic.. This slips down and tight olong the hood ledge so no drilling or modifications are needed for install!
NOTE: This will NOT fit the Firebird Trans Am model line!
As always FREE SHIPPING inside the USA
-
Many of the 1970 - 1981 came with a GM option "deluxe exterior molding package".
This is a 100% complete replacement package which includes all of the following:
- Hood ledge molding,
- Front fender tip moldings,
- Door top outer door reveal moldings
- Vertical oor edge guard moldings.
Officially Licensed GM Restoration Part®
Even if your Camaro wasn't originally equipped with the optional exterior molding package, you can still install it to your Camaro some light modifications will be needed on the door top moldings (Call us and we can explan the process) Also not you will need to replace the door top window sweeps in doing this conversion on a non optioned car to the window sweep weather seals with NO chrome bead as the chrome door top moldings replace the smaller stainless trim on the weather seals.
NOTE: This will NOT fit the Firebird Trans Am model line!
As always FREE SHIPPING inside the USA
-
This is a pair of used GM deluxe exterior moldings which mount onto the door top of cars equipped with the deluxe exterior molding package.
-
This is a pair of used GM front window trim found on 1970 - 1981 Camaro Firebird and Trans Am models.
-
These are a pair of mint condition GM L braces used on hard top models only from 1970 - 1981 on Camaro Firebird and Trans Am models. They connect the long A pillar across the roof line weather seal retainer channel to the vertical B pillar weather seal channel.
Not reproduced and in great shape.
FREE USA SHIPPING
Worldwide Shipping Also Available
- 1
- 2