Sheet Metal
Your 1970 1971 1972 1973 Camaro will probably need more than one item in this section. Here is where we house the nose braces, sheet metal, and flor pans. We offer a wide variety of bushings,and metal to get your car rust free and right.
As always FREE SHIPPING in the USA
-
This is a full window trim clip set for the front and rear windows on 1970 – 1981 Trans Am and Camaro.
-
This is a door hinge bushing repair kit for 70-81 camaro and trans am.
-
1970 - 1981 Trans Am Camaro Spare Tire Rod & Hook NEW
-
1967 - 1981 Camaro Trans Am NEW Radiator Support Bushing Kit. This item is a must have for anyone rebuilding your car's front end. One of the fastest areas of wear out is these bushings.
This kit includes all the correct bushings, heat treated bolts, and washers to remount the radiator core support to the front frame rails and front clip.. -
Set of 6 replacement mounting screws for 1970-1981 Camaro and Trans Am Filler Panel.
-
This is a set of 8 replacement Hood Hinge Bolts for 1970-1981 Camaro or Trans Am.
-
Reproduction header panel for 1970-73 Camaro standard models. Installs directly in front of the hood and extends halfway down the grill on either side.
Manufactured to factory specifications, each panel comes primered and ready to paint.
This header panel fits Camaro models fitted with a one-piece front bumper.
Why spend hours trying to repair,rust, rot, and dents in factory units? Buy it new and save time and money on a new replacement!
As always FREE SHIPPING inside the USA
USA shipping ONLY on this product
-
This is a 1970 - 1973 Camaro RS (Rally Sport) Lower Valance. Unlike the standard panel, this panel does not house the the park lamp /turn signal assemblies. It is finished in a black primer color.This panel is produced in high grade steel and is EDP coateAs always FREE SHIPPING inside the USA
-
This is a new reproduction header panel for 1970-73 Camaro Rally Sport models.
(Upper front nose cone)
Manufactured using the original GM tooling, each panel comes primered and ready to paint. This header panel fits Camaro models fitted with the Rally Sport front end.
Why spend hours repairing rust, rot, and dents in your worn out GM unit? Simply install a new reproduction and be ready for paint!
As always FREE SHIPPING inside the USA
USA SHIPPING ONLY ON THIS ITEM
-
This is a NEW reproduction valance panel for 1970-73 Standard Camaro models fit exactly as the originals! This valance panel is for use with Camaro models without the Rally Sport option.
This panel includes the cut out area for the lower parking lamp assemblies which were located on the lower section of this panel.
Manufactured to factory specifications featuring original style contours, correct mounting points and comes EDP coated for rust prevention
Why spend hours fixIng rust, rot, and dents when you can simply lightly prep, install and go!
Unit fits
1970 Camaro 1971 Camaro 1972 Camaro 1973 Camaro
As always FREE SHIPPING inside the USA
USA SHIPPING ONLY ON THIS ITEM
-
This is a 1970 - 1973 RS Model Grill Polished Filler Surround.
-
OER reproduction of the original front urethane nose for the 1970-73 Rally Sport front end. This high quality reproduction part will fit snugly and enhance the appearance of your front end. The bumper is reproduced using factory style reinforcements and is coated with a high impact urethane material.
Original GM or reproduction brackets may be used for installation. Each bumper comes ready to prep, prime and paint to the desired color. When painting a urethane nose it is highly recommended to use a special urethane high gloss paint with a flexible additive to prevent paint distortion. Be sure to use urethane primer before painting. Do not use any chemical cleaners or abrasives on the urethane before applying primer. Chemicals could prevent the paint from adhering to the urethane or cause the paint to flake off.
SHIPPING AVAILABLE IN THE USA & CANADA ONLY, USE DROP DOWN MENU TO SELECT SHIPPING LOCATION
-
This is a 4 pc set of NEW replacement Trunk Hinge Bolts for 1970-1981 Camaro Trans Am.
-
This is a Used GM floor pan plug for 70-81 Camaro and Trans Am.
-
New GM head light retainers PAIR74-81 Camaro74-76 Firebird Trans Am
-
This is a 52 piece inner fender bolt kit for 70-81 Camaro and Trans Am.
-
These are new replacements rear quarter panel skin drops. Available as a set or individually.
-
When you work on your Camaro don't risk scratching the paint! Use these quality fender covers!
-
When you work on your Firebird / Trans-Am don't risk scratching the paint! Use these quality fender covers!
-
New replacement trunk weather seal channels for 70-81 Camaro and Trans Am.
Used on all:
1970 1971 1972 1973 1974 1975 1976 1977 1978 179 1980 1981 Camaro Firebird Trans Am models.
FREE USA SHIPPING
Worldwide Shipping Also Available
-
This is a used GM 4 speed transmission hump sheet metal section for 1970 - 1981 Firebird Trans Am Camaro.
As always FREE SHIPPING inside the USA
-
This is a 100% correct reproduction of the factory rubber bushings for 1967 - 1981 Firebird Trans Am! These are made to replicate the original GM body bushing in every way. The kit also includes the radiator support bushings! There are 12 bushings per kit.
These bushings and hardware replace the factory bushings which connect the front sub-frame to the body hull of the car.Use the drop down menu below to select year desired!
SHIPPING AVAILABLE WORLDWIDE, USE DROP DOWN MENU TO SELECT SHIPPING LOCATION
-
1970 - 1973 Camaro Radiator Support NEW!
-
1970 - 1981 Camaro Firebird Radiator Support Bushing Repair KitThis set can be welded on to 1970 - 1981 Camaro and Trans Am Firebird radiator core supports where the rad support bushing kit mounts. This provides the proper diameter holes for the sub frame bushings. For use when you have mild to light rot at the mounting poits. Why spend 400+ on a new core support when you can use these repair mounts and be done in under an hour!
-
1970 - 1981 Camaro Trans Am Hood Bumper Adjuster Set!
-
This is a Camaro Headlight bucket retainer housing for use on 1970 - 1973 Camaro models.
-
1970 - 1973 Camaro Rear Body Panel NEW!
-
This is a rear filler panel for 70-81 camaro and trans am.
-
This is a rear valance panel for 70-73 Camaro.
-
Floor And Trunk Pan Body Metal Oval Drain Plug
-
OE quality. original heavy gauge steel with complex curve stampings. Accurate fit and appearance reproduction. Black coated. stamping. RH and LH pair. Officially Licensed GM Restoration Parts. GM Part # 3994714 RH, 3994713 LH
This pair of 1970 1971 1972 1973 Camaro bumper brackets are for the front inner bumper.
FREE USA SHIPPING
Worldwide Shipping Also Available
Use the drop down menu for international orders.
-
OE quality. original heavy gauge steel with complex curve stampings. Accurate fit and appearance reproduction. Black coated. stampings. RH (passenger) side only. Officially Licensed GM Restoration Parts. GM Part # 3994714
Right Hand Side fits 1970 1971 1972 1973 Camaro
Standard and Rally Sport Front End.
-
OE quality. original heavy gauge steel with complex curve stamping. Accurate fit and appearance reproduction. Black coated. LH (driver) side only. Officially Licensed GM Restoration Parts. GM Part # 3994713
For use on 1970 1971 1972 1973 Camaro
Standard and Rally Sport models.
Front bumper LEFT Hand New Replacement Bracket Brace
-
OE quality. Original, very heavy gauge steel accurately stamped. Exact fit and appearance reproduction with correct stamped part numbers as original. . Black coated. RH and LH pair. Officially Licensed GM Restoration Parts. GM Part # 3986566 RH, 3986565 LH
-
For use on 1970 1971 1972 1973 Camaro models with Rally Sport front nose.
Accurate reproduction of original brackets used to mount urethane Rally Sport nose to radiator core support. Officially Licensed GM Restoration Parts. GM PART #: 3998891 LH, 3998892 RH
FREE USA SHIPPING
Worldwide Shipping Also Available
Use the drop down menu for international orders.
-
OE Quality. Original heavy gauge steel. Accurate fit and appearance reproduction front bumper bracket set. Includes correct mounting hardware and bumper bracket cushions and packaged in a heavyweight logo box GM PART #: Outer 3986566-65 RH - LH Inner 3994714 - 13 RH -LH, Cushion 3974546, Nose Brackets 3998891 - 92 LH - RH
FREE USA SHIPPING
Worldwide Shipping Also Available
Use the drop down menu for international orders.
-
OE quality. Original heavy gauge steel. Accurate fit and appearance reproduction front bumper bracket set. Includes correct mounting hardware and bumper bracket cushions and packaged in a heavyweight logo box. Officially Licensed GM Restoration parts. GM PART #: Outer 3986566-65 RH - LH Inner 3994714 - 13 RH -LH, Cushion 3974546
For use on STANDARD Camaro Front Nose Cones and Full Front Bumper
FREE USA SHIPPING
Worldwide Shipping Also Available
Use the drop down menu for international orders.
-
For 1970 -1971 1972 1973 Standard or Rally Sport Camaro's. Accurate reproductions of originals. Officially Licensed GM Restoration Parts. GM Group #: 7.869 GM Part # 327523 LH, 327524 RH
RALLY SPORT MODELS ONLY
FREE USA SHIPPING
Worldwide Shipping Also Available
Use the drop down menu for international orders.
-
For 1970 -1971 1972 1973 Camaro models. All new crisp heavy stamped steel brackets attach radiator support to frame on all 70-73 Camaros. A necessary piece that completes the attachment of the bumper brackets to the frame. GM Group #: 1.271 GM Part #: LH 3967167, RH 3967168
FREE USA SHIPPING
Worldwide Shipping Also Available
Use the drop down menu for international orders. -
For use on 1967 - 1981 Camaro Firebird Trans Am. New rear inner rocker panel drain plug rubber flap covers for your classic. Super easy to install, just push and snap into place. Sold by the pair, does one car.
Units fit:
1967 1968 1969 1970 1971 1972 1973 1974 1975 12976 1977 1978 1979 1980 1981
Camaro Trans Am Firebird
Shipping is FREE inside the USA
Worldwide Shipping Available -
This is a 100% complete Rally Sport nose cone installation kit for all 1970 - 1976 Camaro models.
-
This is a Used GM jack foot base for use with 1970 - 1981 Camaro and Firebird Trans Am models. Great shape used GM unit. Correct GM blue in color.
-
For use on all 1970 - 1981 Camaro Firebird Trans Am. These units mount directly to the cowl panel at the base of the windshield. When installed they support the windshield at the proper height. Correct in everyway these units replace GM Part # 9624995
Sold as a pair
(Does ONE full car)
As always FREE Shipping Inside the USA
-
This is a Camaro nose con brace which runs at the hood release down to the bottom of the core support. Exact year of donor car not known. Unit has been blasted and painted and is ready to install.
See picture.
As always FREE SHIPPING inside the USA
-
This is a pair of the metal band GM door strikers with washers and also the inner door jamb frame retainer plates. All GM items in good shape install and go!
FREE USA SHIPPING
WORLDWIDE SHIPPING ALSO AVAILABLE
-
This is a new front license plate for 70-72 Camaro with RS
SHIPPING AVAILABLE WORLDWIDE, USE DROP DOWN MENU TO SELECT SHIPPING LOCATION