Hood & Hood Related Trim Items
The hood is the focal point of your car, at shows it is open and folks see not only the top but also the underside of it. Make it look great again with specific parts for your 1967, 1968, 1969, Camaro and Firebird from Fbodywarehouse!
As always Shipping inside the USA is free on all of our products
-
New super cool cowl hood rear filler. Got a cowl hood on your car and dont want to do the flapper set up? Stop staring at the open hole at the rear of your cowl hood. Heres the answer, this new filler panel mounts to existing holes in all cowl hoods. Comes in raw galvanized steel and can be painted or coated if you so choose. Includes mounting hardware.
-
New correct style hood louver gaskets for your Camaro Exact fit for all 67 and early 68 Camaro finned or lined hood ornaments. Works great for original GM louvers or any reproduction version.
-
New reproduction chrome hood hinges for first generation Firebird and Camaro models!
These hinges feature the following specs:
- Original gauge material.
- Accurately stamped from high strength steel.
- Quality heavy construction with hardened pivot points.
- OE quality.
- All parts polished then chrome plated by a TS/16-944 Certified OE supplier.
As always FREE SHIPPING INSIDE THE USA
- Original gauge material.
-
This is a full kit for use on the first generation Fbody
1967 1968 1969 Camaro and Firebird
These triple plated chrome fender to radiator support fender bar braces and installation hardware are a great way to dress out your engine bay in minutes! Set includes chrome plated hardware kit for a clean matching install at home!
Polished triple chrome plated after-market style for dress up or show.
Sold as pair.
Includes 4 matching chrome mounting bolts.As always FREE SHIPPING inside the USA -
Complete Camaro 396 Cowl Induction System. Includes all our individually available superior quality parts: Faithfull reproduction air cleaner body with four barrel carb base (Rochester/Holley), attached breather tube (1" hose), stainless spark arrestor, high pleat count performance air filter, original gauge gloss black lid, 396 extension ring, cowl seal flange, flange to hood seal, flapper valve seal, flapper valve, valve retainers, flapper frame and seal, OE quality licensed solenoid (with part number) and firewall relay, concourse quality FACTORY-FIT(c) wiring harness, hood grommet, cowl induction throttle arm with hardware, switch and retainer, correct big block valve cover elbow and grommet. All hardware and installation instructions included. Original high gloss coated black finish.
As always FREE SHIPPING inside the USA
-
Quality reproduction of original throttle arm mounted solenoid switch. Officially Licensed GM Restoration Parts. GM Group #: 3.412 GM Part #: 3959115
For use on 1969 Camaro with Air Induction Hood
1970 Chevelle air induction hood models.
Also fits 1970 1971 1972 Trans Am with functional shaker scoop.
FREE USA SHIPPING
Worldwide Shipping Also Available
Use the drop down menu box for out of country shipment.
-
Faithfull reproduction 302 cowl air cleaner spacer ring in gloss black as original. For use with 302 engines with factory style aluminum intake. Gloss black. Ready to install. GM Group #: 3.417 GM Part #: 3955233
As always FREE SHIPPING inside the USA
-
Faithfull reproduction small block 350 cowl air cleaner spacer ring in gloss black as original. For use with 302 engines with factory style aluminum intake. Gloss black. Ready to install. GM Group #: 3.417 GM Part #: 3955233
As always FREE SHIPPING inside the USA
-
Rubber grommet with stamped spring steel insert keeps cowl induction wiring harness from chafing against hood.
For use on 1969 Camaro models with cowl induction system.
As always FREE SHIPPING inside the USA
-
Accurate stamped steel frame. Includes correct solenoid screw and welded blind nut. Black finish.
Fits 1969 Camaro
As always FREE SHIPPING inside the USA
-
Injection molded high strength ABS. Accurate reproduction of original cowl induction flapper valve.
For use on 1969 Camaro with cowl induction system.
As always FREE SHIPPING inside the USA
-
1969 Camaro with cowl induction.
Set of three injection molded ABS clips hold valve to frame.
As always FREE SHIPPING inside the USA
-
For use on 1969 Camaro models with cowl induction.OE quality cowl induction firewall relay. Brass contacts and phenolic style injection molded base, unlike others.
Officially Licensed GM Restoration Parts.
As always FREE SHIPPING inside the USA
-
For your 1969 Camaro this is an accurate high quality reproduction cowl induction solenoid reproduction includes imprinted part number on case as original.
Officially Licensed GM Restoration Parts.
GM Group #: 3.415 GM Part #: 1114427
As always FREE SHIPPIG inside the USA
-
For use on 1967 1968 1969 Camaro and Firebird
This is a replacement soft rubber hood to cowl seal for 1967-1967 Camaro and Firebird. This seal clips to the underside of the hood, and seals between the hood and cowl ledge.
Replace your missing or dry rotted seals today!
Units fit
1967 1968 1969
Camaro Firebird Trans Am
Shipping is available worldwide
Use the drop down menu below to select ship to location. -
New correct style bolts to mount your hood safety latch, the hood release brace and the release mechanism. Works great for all 67 - 68 Firebird models. Includes 14 bolts and 11 correct metal clip "J" nuts. 1967 - 1968 Firebird Models
-
This is a new replacement bump stop kit for use on 1967 1968 1969 Camaro and Firebird.
This is a 16 pc kit.
FREE SHIPPING INSIDE THE USA
Worldwide Shipping Also Available -
This is a new replacement pair of hood bump stops for use on 1967 - 1969 Camaro and Firebird. This is a 2 pc kit.
FREE USA SHIPPING
Worldwide Shipping Also Available
-
For use on 1967 1968 1969 Camaro and Firebird
Seal measures 43 - 1/4 inch long.
This is a replacement soft rubber hood to cowl seal for 1967-1967 Camaro and Firebird. This seal clips to the underside of the hood, and seals between the hood and cowl ledge.
Replace your missing or dry rotted seals today!Produced by Metro Moulded and backed by a 15 year replacement warranty.
Units fit
1967 1968 1969
Camaro Firebird Trans Am
Shipping is available worldwide
Use the drop down menu below to select ship to location. -
This is a new replacement rubber bump stop kit for use on 1967 - 1969 Camaro and Firebird. This is a 16 pc kit. When installing new replacement weather stripping, replacing the bump stops is also needed. These are simple to install and provide the factory gapping which will prevent premature aging of new weather seals.
Kit Includes the following bump stops:
- Door Bumpers
- Trunk Lid Bumpers
- Hood Bumpers
- Ashtray Bumpers
- Console Lid Bumpers
- Glove Box
MADE IN THE USA!
-
This is a new replacement rubber bump stop kit for use on 1967 - 1969 Firebird. This is a 14 pc kit. When installing new replacement weather stripping, replacing the bump stops is also needed. These are simple to install and provide the factory gapping which will prevent premature aging of new weather seals.
Kit Includes the following bump stops:
- Door Bumpers
- Trunk Lid Bumpers
- Hood Bumpers
- License Plate Bumpers
-
Complete Camaro 350 Cowl Induction System. Includes all our individually available superior quality parts: Faithfull reproduction air cleaner body with four barrel carb base (Rochester/Holley), attached breather tube (1" hose), stainless spark arrestor, high pleat count performance air filter, original gauge gloss black lid, 350 extension ring, cowl seal flange, flange to hood seal, flapper valve seal, flapper valve, valve retainers, flapper frame and seal, OE quality licensed solenoid (with part number) and firewall relay, concours quality FACTORY-FIT(c) wiring harness, hood grommet, cowl inductionn throttle arm with hardware, switch and retainer, correct small block valve cover elbow and grommet. All hardware and installation instructions included. Original high gloss coated black finish.
As always FREE SHIPPING inside the USA
-
For use on Camaro models with Cowl Induction System.
Faithfull reproduction cowl air cleaner flange in gloss black as original. Mounts rubber seal. For use with all system applications. Correct fit and gauge. Gloss black. Ready to install. GM Group #3.417 GM Part #: 3975986
As always FREE SHIPPING inside the USA
-
Correct finish, accurate reproduction. unlike others clip is the correct diameter for proper and easy installation. For .60" diameter switches GM Group #: 3.885 GM Part #: 9788460
For 1969 Camaro models
As always FREE SHIPPING inside the USA.