Moldings & Trim

This is a full window trim clip set for the front and rear windows on 1970 – 1981 Trans Am and Camaro.

This is a roof mounted weather seal retainer used on the 1978 - 1981 Fisher t-top Camaro and Trans Am.

This is a set of 12 door top molding clips for 1970-1981 Camaro and Trans Am.

This is a 55 piece spoiler lower spoiler mounting set for 1970-1981 Trans Am.

This is a replacement set of clips and studs for for 1970-1981 Camaro Trans Am  Door Top Chrome Molding.

This is a full 250 piece exterior Body mounting kit for 1977-1981 Trans Am.

This unit is used GM 1970 - 1981 Trans Am side body molding aluminum, riveted rails.

Unit mounts on front fender.

This is an radiator overflow bottle mounting brace for 1975 - 1981 Trans Am and Firebird

The perch style GM mounting brace lifts and turns the angle of the GM bottle in the engine bay.

ALL PARTS ARE CHEMICAL DIPPED AND RESET INTO A SATING BLAOCK.

This makes the brace look like new and with Zero rust.

Parts are individually bagged and will look great now and later until you are ready for them!.

This is a set of 2 NEW blow out tabs for 1970 - 1981 Camaro and Trans Am.

These mount on the roof rail weather seal channels by 2 pop rivets. The prevent the windows from pushing out at highway speeds. Factory GM units were rubber coats and often peeled and then rusted.

We have an installation video in the Video Library for ease of install!

USA FREE SHIPPING!

Worldwide Shipping Also Available

For use on 1970 - 1981 Camaro Firebird Trans Am models with the deluxe exterior molding package.

Cast original hard die cast material. Heavy chrome plated and show polished. Exact reproductions these units mount UNDER the weather seal retainer trims. These units provide the chrome accent molding trim that run up and down the B pillar posts at the backside of the side glass.

FREE USA SHIPPING

Worldwide Shipping Available

Use the drop down menu to select out of country locations

New replacement door edge guard molding that runs vertically up and down the leading edge of the door.

These are used GM 1973 - 1981 Trans Am / Firebird / Camaro hard top outer body hull weather seal retainers. These are the channels which the actual weather seal sits within and these screw to the tub of the car. The run up the A pillsr (windshield post) and across the top of the doors.

NOT REPRODUCED

SOLD AS A PAIR

Units fit 1973 1974 1975 1976 1977 1978 1979 1980 1981

Camaro Firebird Trans Am Hard Top Models.

FREE USA SHIPPING

Worldwide Shipping Available

Use the drop down menu to select out of country locations

1970 - 1981 Camaro Trans Am Used cowl panel screens.

Used GM cowl panel screens mount on to all 1970 -1 981 Camaro and Trans Am models. These are good to excellent shape may have a ding  here or there but will be a good to great quality piece eady to install. Units are cleaned and dusted in a satin black.

FREE USA SHIPPING

Worldwide Shipping Also Available

This is a GM lower radiator cradle support brace for use on 1977 - 1981 Trans Am

Good used GM shape for being 40+ years old

Unit has been chemical dipped and reset into trim black paint.

Comes sealed in plastic and ready to install.

1977 1978 1979 1980 1981 Firebird Trans Am oOre Support brace.

FREE USA SHIPPING

This is a pair of new replacement deluxe exterior moldings. "Rain gutters"

AS ALWAYS SHIPPING IS FREE INSIDE THE USA

This is a 5 pc set of FRONT window trim for 1970 - 1981 Camaro Firebird Trans Am Factory set in satin black for a custom "Blacked out" look!

This is a 36 pc screw kit used to mount the weather seal retainer channel onto the body of the 1970 - 1981 Camaro and Firebird /Trans Am.

New replacement full screw kit for the hard top or t-top weather seal channel retainers for the roof top of your Classic Camaro Firebird TA.

As always FREE USA SHIPPING

Worldwide SHipping Also Available!

This is a new replacement pair of the lower front windshield eyebrow moldings which keep dirt and debris from standing on the cowl and sheet metal directly below the windshield.For use on 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 Camaro Firebird and Trans AM models. These are often broken or missing.

New reproduction front license plate holder for use on your 1974 - 1981 Camaro and Trans Am.

This is a SINGLE Passenger side aftermarket mud flap for use on 1970 - 1981 Trans Am.

Pretty decent shape. Tough to find after all these years, cool collector item for GREAT as a spare if you have a matching set already! For use on the passenger side of your car

This is a pair Left / Right of the lower front windshield trim for 70-81 Camaro and Trans Am.

For use on all 1970 - 1981 Camaro Firebird Trans Am. These units mount directly to the cowl panel at the base of the windshield. When installed they support the windshield at the proper height. Correct in everyway these units replace GM Part # 9624995  

Sold as a pair

(Does ONE full car)

As always FREE Shipping Inside the USA

This is a pair of new replacement deluxe exterior trim moldings. These attach to the door top exterior. via a series of clips which attach tto small studs that protrude from the top of the door frame.

These are new reproduction uits in stainles and run the entire length of the door top.

We also carry the retainer clips and studs as well!

Units fit both Camaro and Trans Am 1970 - 1981.

SOLD AS A PAIR

FREE SHIPPING insid ethe USA

This is a pair of NEW replacement fender to radiator support fender braces. Units are new and produced to O.E.specs and made here in the USA!

For use on 1977 - 1981 Trans Am and Firebird models. Sold as a pair.

Factory units are rusted or missing altogether! A great and simple way to make your engine bay look new again!

FREE SHIPPING inside the USA!

Worldwide Shipping available!

This is a passenger side unit.

This is a PASSENGER side unit.

Part # 10007269

This is a 10 piece set of window trim for 1970 - 1981 Camaro Firebird Trans Am Factory set in Chrome

Front set includes 3 piece aluminum trim, and 2 lower side trim pieces in plastic.

Rear set includes the upper molding, 2 side moldings (RH and LH) along with the corner connectors (RH and LH)

This is a pair of  nose cone support braces that mount on the UNDER SIDE of the nose cone right at the bottom ledge of the nose grillls. These prevent the nose cone from mis shaping where the nose grills sit and prevent a gap from being created between the bottom of the nose gtrill and athe inset of the nose cone. TRUE GM Parts not reproduced.

FREE SHIPPING INSIDE THE USA

Worldwide Shipping also available.

For use on 1977 - 1978 Trans Am and Firbeird only/

This is a set of 25 Bumper Retainers for Camaro Firebrid and Trans Am.

Units are proper to OEM specs.

Sold as a 5 pc kit  or a 2 pc  Kit

Factory style orange retainer clip.holds the bumper cover onto the impact pars on the front and rear bumper covers.

USA SHIPPING FREE

Worldwide Shipping Available

This is a set of 16 new headlight screws for 1979 - 1981 Trans Am and Firebird.

These screws hold the actual head light band onto the retainer cup as shown.

16 piece set for use on 4 Head light GM cars and trucks of the 1970's era.

Choose from CHROME or BLACK in the drop down menu below.

FREE USA SHIPPING

Global Shipping Available as well!

This is a 3 pc set includes both passenger side units and 1 drivers side unit. All say PONTIAC on them. Aftermarket mud flaps for use on 1970 - 1981 Trans Am.

Pretty decent shape. Tough to find after all these years, cool collector item for GREAT as a spare if you have a matching set already!

This is an radiator overflow bottle mounting brace for 1975 - 1981 Trans Am and Firebird

The perch style reproduction of the GM originial mounting brace lifts and turns the angle of the GM bottle in the engine bay at the inner fender well wheel house.

This nrew part is bagged and will look great now and later until you are ready for them!.

This is a GM reconditioned blow out tab for 1970 - 1981 Camaro and Trans Am.

These mount on the roof rail weather seal channels by 2 pop rivets. The prevent the windows from pushing out at highway speeds. Factory GM unit was chemical dipped to remove dirt and rust. We then clear coated it so a showroom appearance. Excellent shape install and go.

USA FREE SHIPPING!

Worldwide Shipping Also Available

This unit is used GM 1970 - 1981 Trans Am side body molding aluminum, riveted rails.

Select between Camaro and Trans Am version as lengths do vary by application