Center Consoles & Parts

Unit fits all 73-81 Camaro and 70-81 Trans Am / Firebird model. Can be used on both the automatic or 4 speed console. Unit fits in properly and is an exact reproduction of the GM part.

The hinge on the GM units break and split, this new replacement unit fits and looks just like GM and will last for years to come! Install is simple and can be done at home in about 30 minutes. We carry a full line of replacement center console parts, it is now possible to assemble a completely new center console if needed!

As always FREE SHIPPING isnide the USA

This is a brand new reproduction center console lid button for 73-81 Camaro and 70-81 Trans Am. Correct replacement for push button style console lid latches.

Replace that annoying console lid latch that wont stay shut with a new reproduction piece from Fbodywarehouse. Also available are the lid button spring and lid spring to complete your bin latch project.

As always FREE SHIPPING inside the USA

New reproduction console bin tension spring for 1972 - 1981 Camaro and 1970 - 1981 Trans Am This spring mounts to the liner and makes it so when you open the center console bin lid it stays open. Install takes minutes at home and we have a video in our video library to assist you in the install.

Unit fits

1970  Firebird Trans Am
1971  Firebird Trans Am

1972 Camaro Firebird Trans Am

1973 Camaro Firebird Trans Am

1974 Camaro Firebird Trans Am

1975 Camaro Firebird Trans Am

1976 Camaro Firebird Trans Am

1977 Camaro Firebird Trans Am

1978 Camaro Firebird Trans Am

1979 Camaro Firebird Trans Am

1980 Camaro Firebird Trans Am

1981 Camaro Firebird Trans Am

As always FREE SHIPPING inside the USA.

As always FREE SHIPPING inside the USA

Console Shift Plate for 1973 - 1977 Camaro with Automatic Transmissions

This reproduction console shift plate from OER® is for use on all 1973-78 Camaro models with automatic transmissions. This shift plate is black and includes the correct countersunk mounting locations for the attachment screws. The shift pattern islocated on the instrument carrier assembly on the dash in front of the driver.

Produced from the original GM tooling.

Officially Licensed GM Restoration Part®

As always FREE SHIPPING inside the USA

Resetting of color includes the following steps:

This is a Shifter Hog Ring for 1970-1981 Camaro and Trans Am.

Console mounting kit for 1970-1981 Trans Am or 1973-1981 Camaro.

This is a replacement bulb for 1970 – 1981 Trans Am or 1973 – 1981 Camaro Shifter Bezel Light.

This is a NEW Hurst 4 Speed Shifter Knob for 1970-1981 Camaro and Trans Am.

This is a 100% complete fully pre-assembled center console bin set for 73-81 Camaro and 70-81 Trans Am.

This is a center console bin cup holder for use on 73-81 Camaro and 70-81 Trans Am.

Our 1970 - 1981 Camaro  kit includes a full SKU sheet with a complete break down of exactly where every piece goes on your car's cabin. It also has all screws bagged and tagged for an easy and organized installation on the car.

This kit is nearly 300 piece!

This is by far the most comprehensive kit in the industry and includes:

* Dashboard mounting kit - Everything for your car's dash.

(Includes upper and lower dash hardware)

* Center Console Mounting Kit - Every mounting screw top to bottom, front to back for the center console.

* Door Panel Mounting Kit - Year specific to your car 100% correct and complete for your car's door panels.

* Seat Mounting Kit - Seat to seat track and seat track to floor bolt kit.

* Interior Screw Kit - Our base kit for all of the plastics and trim in your car. We have pioneered the interior screw kit. Many companies offer a "copy cat" version of our kit. Replication is the highest form of flattery!

This in a nutshell is EVERYTHING in your interior. Every nut, bolt, screw, clip & fastener is NEW and has been check and cross checked to ensure a clean and stock appearance. While not every piece maybe a 100% perfect match to stock these will be the best and closest in appearance you will find anywhere.

Please select you cars needs using the drop down boxes below.

SHIPPING AVAILABLE WORLDWIDE, USE DROP DOWN MENU TO SELECT SHIPPING LOCATION

This is an accordion style shift boot for 70-81 Camaro and Trans Am with manual transmission. This is the upper shift boot found on manual transmission cars. This one wraps tightly against the shifter handle and looks like an accordion in shape.

As always FREE SHIPPING inside the USA

This is a lower shift boot for 70-81 Camaro and Trans Am with 3 and 4 speed manual transmissions. 

Unit mounts under the accordion shift boot in the center console. This boot is used to prevent excess heat from entering the cabin along with road noise. The accordion shift boot mounts on top of this unit.

As always FREE SHIPPING inside the USA

1967 - 1981 Camaro Trans Am 4 Speed Shift Knob
4 Colors to Choose From!

3/8 Inch Course Thread Style
Fits Factory Shifters

Available in 4 distinct colors, a great way to make your ride look a touch custom, or go back to stock appearance!
MADE IN THE USA

Use the drop down menu below to select color desired.

SHIPPING AVAILABLE WORLDWIDE, USE DROP DOWN BOX TO SELECT SHIPPING LOCATION        

This is a shifter tunnel for 70-81 Camaro Trans Am.

1967 - 1981 Camaro Firebird Trans Am manual or automatic cars.

Correct screws for clutch cover on automatic cars and clutch rod boot on manual cars.

Use the proper fasteners for a proper restoration!

FREE SHIPPING IN THE USA

Worldwide Shipping Also Available!

1967 - 1981 Camaro Firebird Trans Am Accurate reproduction. Die stamped steel block off plate used on all factory automatic equipped 67-81 F-Body, 68-79 X-Body. Blocks and seals what would otherwise be the firewall clutch upper push rod opening. Original style and appearance die molded heavy seal included. For use on manual to automatic conversions, why try and fabricate something when you can simply bolt in place and go looking GM correct!

FREE SHIPPING IN THE USA

Worldwide Shipping Also Available!

This is an automatic shifter light shifter bulb holder for 1977 - 1981 Camaro and Trans Am

Unit has been stripped to true bare metal.

USA SHIPPING FREE

Worldwide Shipping Available

This is a NEW replacement Hurst Dual Gate shifter inlap in silver fish scale inlay.

Note the T/A logo can be replaced b about anything you would like if the size will fit.

When ordering if you would like your inlay to say something else simply ADD the work etc into the NOTES section of your order.

This is a peel and stick decal just like Hurst provided with the shifters when they were new.

We are not able to put the Hurst logo onto the inlay due to copyright laws.

Shipping FREE INSIDE THE USA

Worldwide Shipping also available

use the drop down menu below to select ship to location.

This is not a thin sticker.it has a thin base and the leters are translucent so it will illuminate.

From a Old Hurst Dual Gate Shifter Set in the box I had many moons ago. Includes the exploded diagram, and assembly instructions.

Long discontinued this is a great set.

A good person with a crycut machine and a good printer will see the business opprotunity here.