Sheet Metal & Bumpers

These are new replacement new headlight bezel spacer nuts for 1979 - 1980 - 1981 firebird and trans am.

This is a door hinge bushing repair kit for 70-81 camaro and trans am.

1967 - 1981 Camaro Trans Am NEW Radiator Support Bushing Kit. This item is a must have for anyone rebuilding your car's front end. One of the fastest areas of wear out is these bushings.

This kit includes all the correct bushings, heat treated bolts, and washers to remount the radiator core support to the front frame rails and front clip..

SHIPPING AVAILABLE WORLDWIDE, USE DROP DOWN MENU TO SELECT SHIPPING LOCATION

This is a 1980 - 1981 Trans Am Turbo Hood Light Insert housing.

This is a set of 25 Bumper Retainers for a 1978-81 Camaro or 1979-81 Trans Am.

This is 1977-1981 Trans Am Radiator Support Upper Mount Kit. 29 pc Set. 

Set of 6 replacement mounting screws for 1970-1981 Camaro and Trans Am Filler Panel.

This is a set of 8 replacement Hood Hinge Bolts for 1970-1981 Camaro or Trans Am.

This is a 4 pc set of NEW replacement Trunk Hinge Bolts for 1970-1981 Camaro Trans Am.

This is a 1979-1981 Trans Am 55 pc Urthene Nose Cone Mounting Kit.

This is a full 250 piece exterior Body mounting kit for 1977-1981 Trans Am.

This is a set of reconditioned fender bars for 74-81 Trans Am. They have been bead blasted and reset to black trim paint. 

Includes NEW mounting bolts and retainers

SHIPPING AVAILABLE WORLDWIDE, USE DROP DOWN BOX TO SELECT SHIPPING LOCATION

This is a 52 piece inner fender bolt kit for 70-81 Camaro and Trans Am.

This is a set of 16 new headlight screws for 1979 - 1981 Trans Am and Firebird.

1970 - 1992 Quarter panel skin reproduction

Use the drop down menus to select year and model for your needs.

FREE USA SHIPPING INCLUDED IN PRICE

New replacement trunk weather seal channels for 70-81 Camaro and Trans Am.

Used on all:

1970 1971 1972 1973 1974 1975 1976 1977 1978 179 1980 1981 Camaro Firebird Trans Am models.

FREE USA SHIPPING

Worldwide Shipping Also Available

This is a GM lower radiator cradle support brace for use on 1977 - 1981 Trans Am

Good used GM shape for being 40+ years old

Unit has been chemical dipped and reset into trim black paint.

Comes sealed in plastic and ready to install.

1977 1978 1979 1980 1981 Firebird Trans Am oOre Support brace.

FREE USA SHIPPING

This is a 1977 - 1981 Trans Am Inner Fender to Firewall Brace Set

Includes Left and Right Hand Sides

General Motors parts in great shape install and go, cleaned and set to low luster black. Out of the box onto the car!

This mounts on the body tub extension and the inner fender then bolts to this bracket.

FREE USA SHIPPING
Worldwdie Shipping Also Available

This is a MEW 1978-1981 Camaro and 1979-1981 Trans Am license plate light . This is a new unit. Unit is excellent condition.

Includes:
New replacement Lens / Housing

New replacement Mounting Hardware Kit

New Replacement Correct New Bulb

SHIPPING AVAILABLE WORLDWIDE, USE DROP DOWN MENU TO SELECT SHIPPING LOCATION

For use on 1967 - 1981 Camaro Firebird Trans Am. New rear inner rocker panel drain plug rubber flap covers for your classic. Super easy to install, just push and snap into place. Sold by the pair, does one car.

Units fit:

1967 1968 1969 1970 1971 1972 1973 1974 1975 12976 1977 1978 1979 1980 1981

Camaro Trans Am Firebird

Shipping is FREE inside the USA
Worldwide Shipping Available

For use on 1970-1981 Camaro Firebird Trans Am. rear hood adjust bumper for all 70 - 81 models. Mount on each side of your cowl panel. Two required per car and now sold in a PAIR! New tooling ensures a proper fit with exact details for an original look. Made with a new high grade rubber compound to last for years to come.

 Replaces GM Part # 3973952 Units fit:

1967 1968 169 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981

Camaro Firebrid Trans Am  Models

FREE SHIPPING inside the USA

New reproduction front license plate holder for use on your 1974 - 1981 Camaro and Trans Am.

This is a SINGLE Passenger side aftermarket mud flap for use on 1970 - 1981 Trans Am.

Pretty decent shape. Tough to find after all these years, cool collector item for GREAT as a spare if you have a matching set already! For use on the passenger side of your car

For use on all 1970 - 1981 Camaro Firebird Trans Am. These units mount directly to the cowl panel at the base of the windshield. When installed they support the windshield at the proper height. Correct in everyway these units replace GM Part # 9624995  

Sold as a pair

(Does ONE full car)

As always FREE Shipping Inside the USA

This is a new replacement rear bumper cover to quarter panel mounting plates with studs for use on 1977 - 1981 Trans Am.

Sold as a pair left and right.

 These steel brackets measure appx 6-3/4" and have the correct curve and mounting studs in the correct location. These brackets bolt the rear bumper cover thru the quarter panel. Includes hardware.

Includes mounting hardware.

As always FREE SHIPPING inside the USA

This is a pair of NEW replacement fender to radiator support fender braces. Units are new and produced to O.E.specs and made here in the USA!

For use on 1977 - 1981 Trans Am and Firebird models. Sold as a pair.

Factory units are rusted or missing altogether! A great and simple way to make your engine bay look new again!

FREE SHIPPING inside the USA!

Worldwide Shipping available!

This is a PASSENGER side unit.

Part # 10007269

Correct front end radiator support lower outer braces. GM parts! Excellent shape install and go. These mount from the core support and extend to the nose cone bracing.

SOLD AS A PAIR

GM # 10007410

FREE USA SHIPPING

Worldwide Shipping Available

Use the drop down menu below.

This is a set of 25 Bumper Retainers for Camaro Firebrid and Trans Am.

Units are proper to OEM specs.

Sold as a 5 pc kit  or a 2 pc  Kit

Factory style orange retainer clip.holds the bumper cover onto the impact pars on the front and rear bumper covers.

USA SHIPPING FREE

Worldwide Shipping Available

This is a installation hardware kit for the 1978 1979 1980 1981 Camaro model.

This kit provides all of the hardware new that you could need for the proper install of the rear bumper cover on the late 2nd generation Camaro models.

FREE USA SHIPPING

Worldwide Shipping Also Available

This is  is a floor pan section for 75-81 Camaro and Trans Am.

This is one of the front seat mounting poits. This is for the REAR seat track mounting points.

Many of the new floor panels do NOT includes this threaded for bolt reenforced areas.

Take this to your floor guy and have your sheet metal work done right!

FREE USA SHIPPNG

Worldwide Shipping Also Available

This is  is a floor pan section for 75-81 Camaro and Trans Am.

This is one of the front seat mounting poits. This is for the REAR seat track mounting points.

Many of the new floor panels do NOT includes this threaded for bolt reenforced areas.

Take this to your floor guy and have your sheet metal work done right!

FREE USA SHIPPNG

Worldwide Shipping Also Available