1967 - 1969 Camaro / Firebird
You have struck pay dirt! For your first generation Camaro or Firebird Fbodywarehouse offers a massive selection of screw kits and mounting hardware kits for your 1967 1968 1969 models. We discovered long ago, new parts are great but using rusty hardware and mismatched mounting hardware simply does not work. Enjoy our selection of replacement hardware kits and know it will be right!
As always shipping is FREE inside the USA.
- 1
- 2
-
This is a replacement screw set for the sill plates on 70-81 Camaro and Trans Am.
-
This is a 10 ft section of wiring loom for 1967 - 2002 Camaro or Trans Am.
Various diameter available
When working on the engine bay of your car, replacing the wire loom can really make a difference in the appearance and looks of your engine bay!
After 30-40 years factory wire loom becomes brittle, breaks and gets painted often. Bring your car back to showroom in appearance. Install is simple and can be done in a few moments at home!
As always FREE SHIPPING isnide the USA.
-
Complete hardware kit to assemble 68-69 console gauges. Kit contains ground wire to get the job done right the first time. Assemble a new gauge kit or repair your original with this complete hardware kit.
-
This is a 1967 - 1969 Firebird Front Spoiler Installation Set NEW!
SHIPPING AVAILABLE WORLDWIDE, USE DROP DOWN MENU TO SELECT SHIPPING LOCATION
-
This is a NEW replacement set of top post battery cable terminals.
-
Battery tray hold down clamp bolt for 67 - 81 Camaro. Plated.
-
This is a new 4 pc fender bar mounting hardware kit for use on the 1967 - 1969 Firebird and Trans Am models.
-
This is a new replacement alternator mounting hardware kit for use on your 1968 - 1978 GM Small Block Engine.
-
Correct chrome air cleaner wing nut for your 1966 - 1981 GM applications..OE size, shape, and details.Correct chrome wing nut for chrome lid air cleaners. Will work on any 1/4"-20 carburetor stud found on Rochester and Holley carburetors.
This is simply the best quality wing nut available.Sold individuallyAs always FREE SHIPPING isnide the USAFitsChevelle, Malibu, Nova, Camaro, El Camino, Corvette, Ventura, Lemans, GTO, Chevy 2, Cutlass, Regal, Firebird, Trans Am, GTO,FREE USA SHIPPING
Worldwide Shipping Available
Use the drop down menu to select out of country locations
-
1967 - 1968 Camaro and Firebird Steering Column Firewall Plate Mounting Hardware
-
This is a new replacement 1967 Camaro front and rear bumper hardware kit (bolt kit)
-
1968 - 1969 CAMARO BUMPER BOLT KIT for frint and rear bumpers.
-
1967 - 1968 Camaro Rally Sport Door Chrome Molding Rivet Set
-
1967 - 1981 Camaro Trans Am Door Handle Latch Mechanisms Mounting Screws New
-
1967 - 1969 Camaro Firebird Door Panel Armrest Base Screws Kit 4 pc
-
1968 - 1969 Camaro Firebird Door Panel Armrest Pad Mounting Screw Kit
-
1967 - 1981 Camaro Firebird Door Jam Striker Washer New
-
Complete hardware kit to assemble 1968 - 1969 Camaro center console.
Kit contains all hardware to get the job done right the first time. Assemble a new console kit or repair your original with this awesome hardware kit.
35 pc kit.
Exact fit for all 68 - 69 consoles (excluding gauges).
Works for automatic or manual transmissions.As always FREE SHIPPING inside the USA
-
New correct design pillar post installation screw set. Exact fit for all 1968 - 1969 camaro , firebird , and trans am models. Does both sides and works great for all hardtop and convertible versions.
Free Shipping Inside the USA
-
1967 - 1969 Camaro & Firebird Rear Spoiler Mounting Hardware Kit
-
1967 - 1969 Camaro Firebird Rear Spoiler Mounting Stud Kit
-
This reproduction plug holds the firewall insulation pad in place on various GM models. It is manufactured from rubber and features the correct GM part number (3868790) stamped in as original. Quantities vary by model. Use as needed.
-
Set Of 12 Metal Door Panel Clips
-
This is the retainer pin which holes the gas pedal onto the assembly rod. This fits all:
1967 - 1981 F body cars. Camaro - Firebird - Trans AmAs always FREE SHIPPING inside the USA -
Mounting hardware kit for mounting accelerator lever firewall support on1967 1968 1969 Camaro and FirebirdGas Pedal Mounting brace.As always FREE SHIPPING inside the USA
-
Mounting brace for mounting accelerator pedal assembly on 1967 1968 1969 Camaro and Firebird.Correct reproduction of one of the two original support brackets used. Thermoplastic material. Tough injection molded material manufactured to exact tolerances for easy mounting and operation.GM Part #: 3924409As always FREE SHIPPING inside the USA
-
Rubber grommet with stamped spring steel insert keeps cowl induction wiring harness from chafing against hood.
For use on 1969 Camaro models with cowl induction system.
As always FREE SHIPPING inside the USA
-
Accurate stamped steel frame. Includes correct solenoid screw and welded blind nut. Black finish.
Fits 1969 Camaro
As always FREE SHIPPING inside the USA
-
Injection molded high strength ABS. Accurate reproduction of original cowl induction flapper valve.
For use on 1969 Camaro with cowl induction system.
As always FREE SHIPPING inside the USA
-
1969 Camaro with cowl induction.
Set of three injection molded ABS clips hold valve to frame.
As always FREE SHIPPING inside the USA
-
This is a new replacement battery junction block for 1967 - 1969 Camaro and Firebird Trans Am. Technically correct reproduction with correct style nut included. GM Part # 3905263
FREE USA SHIPPING
Worldwide Shipping Also Available
-
1967 - 1969 Camaro and Firebird Correct reproduction positive cable oil pan clip (requires two). Rubber coated spring steel with correct bolt hole size and oil pan clearance bends as original.
FREE USA SHIPPING
Worldwide Shipping Also Available
-
Holds front and both rear park brake cables to subframe and body. Correct diameter and material reproduction, with original black oil finish.GM Part # 3875092
FREE USA SHIPPING
Worldwide Shipping Also Available
-
Exact reproduction for listed applications. Center brake cable runs through equalizer which attaches to threaded end of front park cable. Black oil finish. GM Part # 6256437, 1497525
FREE USA SHIPPING
Worldwide Shipping Also Available
-
Parking brake adjustment nuts. Plated.for use on Camaro and Trans Am
FREE USA SHIPPING
Worldwide Shipping Also Available
-
Exact reproduction with correct round center hole for listed applications. Plated cad finish. Joins rear cables to center cable. GM Part # 537485
-
For use on 1967 - 1981 Camaro and Firebird Trans Am. Correct reproduction Green guide bar springs. First time offered separately from park brake lever kit.
New replacement
FREE USA SHIPPING
Worldwide Shipping Also Available
-
For use on 1967 - 1981 Camaro and Firebird Trans Am.Exact reproduction of original instamped steel of the horizontal parking brake guide bar sold as a set Left and Right.
FREE USA SHIPPING
Worldwide Shipping Also Available
-
This is a new replacement 1967 - 1973 Camaro Bumper Bracket to Frame Bolt Kit.
Kit fits 1967 1968 1969 1970 1971 1972 1973 Camaro models. Hardware bolts the rear bumper brackets to the body of the car.
FREE USA SHIPPING
Worldwide Shipping Also Available
-
Correct bolt set to mount outer front bumper brackets to fender extensions on 1969 Camaro models. This bolt kit will replace your GM hardware and is correct! Not some cheap China junk!
FREE USA SHIPPING
Worldwide Shipping Also Available
-
Correct hardware to bolt front bumper extension brackets to inner frame brackets on your 1969 Camaro Having the proper hardware to restore the nose and front bumper is the only way to go! Other companies offer generic hardware kits. This one is correct and will make a difference in the overall finished appearance on your car.
FREE USA SHIPPING
Worldwide Shipping Also Available
-
1968 - 1969 CAMARO BUMPER BOLT Set Long Length Bolts
Sold as a pair.
FREE USA SHIPPING
Worldwide Shipping Also Available
Use the drop down menu box for out of country shipment.
-
1968 - 1973 CAMARO BUMPER BOLT Short Length Bolt
New replacement bolt is sold individually. Proper finish and highest quality in the industry!
FREE USA SHIPPING
Worldwide Shipping Also Available
Use the drop down menu box for out of country shipment.
-
1968 - 1973 CAMARO BUMPER BOLT Nut
Units are sold individually.
FREE USA SHIPPING
Worldwide Shipping Also Available
Use the drop down menu box for out of country shipment.
-
For use on all 1967 - 1981 Camaro and Firebird Trans Am with 4 speed manual Transmission. Set of four reproduction pedal shaft bushings. Used with all auto and manual pedals. Group 0.831 and 4.626 GM Part #: 3798256, 3965692, 1247439, 140048221
FREE SHIPPING IN THE USA
Worldwide Shipping Also Available!
-
Accurate, quality heat treated reproduction, plated. GM Group #: 4.634 GM Part #: 3828427
1967 1968 1969 F body cars. Camaro - Firebird - Trans AmFREE USA SHIPPINGWorldwide Shipping Available -
Retaining clip for clutch pedal on manual transmission cars and pin on automatic transmission cars. One required per car. Clip is included on clutch and brake pedal assembly Group 0.837 & 4.634 GM Part # 3828428
This fits all:
1967 - 1972 F body cars. Camaro - Firebird - Trans AmFREE USA SHIPPINGWorldwide Shipping Also Available -
Accurate reproduction injection molded plastic clutch pedal bushing. GM Group #:0.854 GM Part #: 406172 This fits all:
1967 - 1983 F body cars. Camaro - Firebird - Trans Am -
For use on 1967 - 1992 Camaro Firebird Trans Am. These are replacement retainer clips that insert into your rubber weatherstrip for installation. Replace your missing or broken clips today! Sold in a 10 piece package.
-
For use on 1967 - 1992 Camaro Firebird Trans Am. These are the small push clips that secure your rubber weatherstrip at each end. Sold in a 10 piece package. Replace your missing or broken clips today! Sold in a 10 piece package.
- 1
- 2